Products

1 pcs. Yamaha Spezial Keyboard grease VAG94900 , white 50g Original Yamaha plastic grease for Keyboards.Color is white and will be delivered in a 25 gramm portion.On Yamaha NL4 Keyboards are used 5 different grease.This grease can also be used on Yamaha keyboards at key guides. 

Hammer for a Technics E-Piano, 88 Key HammeractionThe hammers are used and in good condition. All keys supplied by us have been tested.2. different hammer versions:Please pay attention to the details. This Technics keyboard is also available with a pressure point simulation. The hammers in this keyboard version are constructed slightly differently in detail. Please take a close look.Technics has always used the same keyboard for many years. Today it has the advantage that the spare parts are easily interchangeable between the different instruments.We are of the opinion that Technics has used a very good and above all durable keyboard here. In addition to the good sound of the electric pianos, this is a definite plus point in favour of Technics electric pianosAssembly instructions:To be able to use a hammer, the keyboard must at least be unscrewed. This allows the keyboard as a whole to be pushed slightly away from the front edge. Now the key must be unscrewed. The hammer can then be removed from the top. 

1 Pc Korg Top Keystroke Felt for Electric Piano KeyboardsThis felt is used by Korg in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 4 times.

1 pcs. Panasonic Battery holder CR2032 pinspacing 20 mmWe offer a battery holder that is suitable for standard CR2032 button cells. The advantages of this battery holder are its very secure battery retention and good pin spacing for circuit board mounting.This battery holder is used in many musical instruments.Technical Description of Panasonic Battery Holder:The battery holder is designed for circuit board mounting and has one solder leg for the positive pole and one solder leg for the negative pole.The distance between the two solder legs is 20 mm.A space measuring 25 mm x 26 mm is required for installation. 

1 pcs. Kawai Speaker KS08-005 SquawkerNEWsuitable forKawai NV5

1 pcs. slide potentiometer with 45mm travelEnsoniq  Electrical properties:The stereo nominal resistance has 10 kOhm (Kilo-Ohm), the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation): The slide potentiometer has a travel of 45 mm. Its metallic casing measures 60 x 8 mm, the height without lever is 7 mm. The lever is made of metall and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 1,2 mm. The solder contact pins are 0,8 mm wide (one of them).In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The value control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit Mono without switch These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 x Fatar TP40 Keybed FeltThis felt is used by Fatar in the TP40 keyboard and dampens the keys when they return to their resting position after being released.In the drawing, the felt is marked in red (felt strip).This felt consists of several layers of different materials.For easier installation, this felt is equipped with adhesive tape.  

1 pcs. Felt for Yamaha FS Keyboard Key Stopper Felt white softThe key felt on many digital pianos, keyboards and synthesisers has started to show its age. As a result, the keyboard can become very noisy when played.The keyboard is rattling.This felt is relatively soft. Because of this softness, the felt compresses easily, meaning that its effective thickness under load is considerably less than the stated 3.5 mm. This softness provides very good cushioning.Fitting a new felt pad will solve this problem. A simple but effective solution.We have had this felt pad specially made by a company that specialises in the manufacture and processing of a wide variety of felts. You will receive a high-quality piano felt pad of the very best standard. Made in Germany. You will need one for a complete Keyboard with 88 keys.The felt can be trimmed for keyboards with fewer keys.One-sided self-adhering 

Varta 3/V 150 NI-MH rechargeable with 2 solder pin suitable forKorg PolySixKorg Poly-61Varta produces two almost identical batteries of this type. The main difference is the design of the housing.Attention: Shipping for Europe only Dimensions for PCB layout: 17,7 x 10 mmTechnical Description:The dimensions of 3V/150 are hight of 26,8 mm and a deepth of 17,7 mm. The distance between the solder legs is 17,7 mm. The + pol has to legs with a distance of 10 mmThe akku is charged and ready for use.Practical tip:The akku is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs. new LCD Display with LED Backlight replacement including cable Kit forKorg T1Korg T2Korg T3We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementPlease let us know your instrument. The cable must fit specifically to the instrument. Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display:The instrument must be disassembled almost completely to reach the display.Small soldering job: For the new display a jumper has to be soldered on the audio board.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people. 

1 pcs Dial Knob suitable forRoland Fantom X6Roland Fantom X7Roalnd Fantom X8

Slide potentiometer with 30mm travel. Suitable forKorg M3Korg Kronos 61Korg Kronos 73Korg Kronos 88Korg      spare part No.: 500365011400Specifications:Resistance: 10 kOhmtravel: 30 mmTechnical description:The potentiometer has a sliding path of 30 mm. Praktical tip:The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Slide switch with solder Pins for PCB mounting suitable forRoland Juno 106 - DCO,VCF,VCAtechnical Dates:Termination Solder PinSupplied without capPractical advice:Knowledge in soldering is required for switch replacement.

Mini Din socket female 6 pin for printed circuitthis mini din socket is used in older Yamaha E-Pianos for connecting foodswitch.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Power cabel 2m with 3P C13 plug   

1 pcs. Power cabel 1.5m with 2P Europlug and solderlugsPower Cord with on side open adn one side Euro PlugOriginal cable fragile or already damaged?For instruments that are 30 years and older, it makes sense to check the power cord. Has the plastic become brittle over the years or is there damage at the kinks of the cable? 

1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. tactile switch suitable for modelsCasio FZ-10MCasio FZ-20MCasio VZ-1Casio VZ-10MThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 piece bipolar Elko22uF/50V for Speaker NetworksManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The DB series is developt spezial for use in Speaker Networks. Spezial benefit is radial construstion.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 piece Elko 2,200uF/16V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 piece Electrolytical Capacitor 10uF/50V for Audio circuits  - discontinued -Manufakturer: NichiconSeries: KWHere i offer spezial Capacitor from manufakturer Nichicon. The series KW is developt spezial for use in audio circuits.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 piece Electrolytical Capacitor 3300uF/35V for Audio circuitsManufakturer: NichiconSeries: KWHere i offer spezial Capacitor from manufakturer Nichicon. The series KW is developt spezial for use in audio circuits.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. Electrolytical Capacitor 4,7uF/50V SMD Manufakturer: Nichicon The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.