1 pcs. Kawai Power Button RoundKawai ES-6Kawai ES-7Kawai ES-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of diameter 11 mm. This part has one Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape. 

1 pcs. Kawai  Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are pushed For better mounting this felt is equipped with an adhesive tape.  

1 pcs. Contact rubber for Kawai WR88 KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high:  11 mmStrip bright:   25 mmStrip length:  164  mmNumber of contacts: 12These contactrubber for e-pianos has been used in:Kawai CA67Kawai CA78Kawai CA79Kawai CA97Kawai CA98Kawai CA99Kawai CS8Kawai CS11A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

1 pcs. Kawai Power Buttonblack  for CA/CN Modells Technical Description of Kawai Button:This Button fits for many Kawai Pianos and is build for a Casing Window of 17 x 11 mm. This part has one Button. It is used with Powerswitch with plungers.Practical tip:This button is simply clipped on 

1 pcs. Kawai Round KnobKawai MP-8Kawai MP-7Kawai MP7SEKawai MP-11Technical Description of Kawai Knob:This Round knob will be put on rotary potentiometer on your Kawai Stage Pianos

Replacement keys for KAWAI Keyboard RH-88Bsuitable forKawai CN33Kawai CN34Kawai ES7Kawai MP7The Kawai RH88B keyboard is a velocity sensitive keyboard with 4-zone hammer action.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RH88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88 

1 pcs. Power cabel 1,8 m with 2P plug for Europe  

Replacement keys and spare parts for Fatar TP/8S Keyboard, weightedWe would like to expressly point out that the keys are used. Fatar keys tend to darken and yellow significantly. Under certain circumstances, it may be that we currently only have very darkened keys in stock.Fatar TP/8S keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white. 

1 pcs. Kawai  Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are returning to zero position. In the drawing it is the two felts with the number 34This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.  

1 pcs. Encoder 16 mm widht suitable forKawai K5000 Practical advice:The thread of this encoder is 2 mm longer than the thread of the ALPS encoders. Depending on the space in the housing, it can tighten a bit when reassembling. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

BA15532 Dual Operational Amplifier with low noise for audio applicationMechanical Description:The Amplifier is housed in a SOP 8 package and is designed for SMD mounting on a circuit board. The Amp has 2 x 8 connecting pins with grid of 1.27 mm x 4.4 mm.

Kawai Pedalcable No2

1 pcs. Service Kit Kawai RH88A PWB Assy KKB-034This service kit replaces the circuit boards and contact rubbers in the Kawai RH88A keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CN23Kawai CN33Kawai CN43Kawai CS3Kawai MP6

Replacement keys for KAWAI Keyboard RG-88Bsuitable forKawai CN14Kawai ES6Kawai ES100The Kawai RG88B keyboard is a velocity sensitive keyboard with 4-zone hammer action.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RG88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88 

1 pcs. Kawai Volume Slider KnobKawai MP-8Kawai MP-11 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Stage Pianos

1 pcs. Service Kit Kawai WN88 PWB Assy KKB-039This service kit replaces the circuit boards and contact rubbers in the Kawai WN88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-039.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA65Kawai CA95Kawai CS7Kawai CS10Kawai MP11Kawai VPC1

Replacement keys for KAWAI Keyboard RH-88Dsuitable forKawai CN35Kawai CN39Kawai ES8Kawai MP7SEThe Kawai RH88D keyboard is a velocity sensitive keyboard with 4-zone hammer action.This keys are weigted.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RH88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88 

LCD Display with LED Backlight replacement including cable Kit forKawai K5000 We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Yamaha USB Socket Typ A PCBJalco YKF45-0021used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

LCD Display with LED Backlight replacement including cable Kit forKawai K5000 We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs blue LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5m We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(1)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040. The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CN17Kawai KDP110Kawai KDP120Kawai ES520Caution during disassembly: The operation LED on the front of the piano is plugged into the sensor board.

1 pcs Kawai Power Switch Board KEP-416   -- Discontinued --this PCB fits inKawai ES7Kawai ES8Mechanical Description: Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Kawai Volume Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.