1 pcs. CR2450Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 24.7 mm and a thickness of 5mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

1 pcs external Power Supply Unit Kawai PS-154AMechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Delivery only with secondary cable.Electrical properties:Primary: 100-230V ACSecundary: 15V DCCurrent: 4AUse: EuropePractical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Kawai Button Duo large 14 x 8 mmKawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 14 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

1 pcs. Kawai Button Duo Small 11 x 8 mmKawai ES-7Kawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 11 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

1 pcs external Power Supply Unit Kawai PS-129Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Delivery only with secondary cable.Electrical properties:Primary: 100-230V ACSecundary: 12V DCCurrent: 4AUse: EuropePractical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Service Kit Kawai RG88B PWB Assy KKB-015This service kit replaces the circuit boards and contact rubbers in the Kawai RG88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.This set of boards replaces the board KKB-015 The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai KDP-80Kawai KDP-90Kawai ES100Kawai CN31Kawai CN32Kawai CL-15

1 pcs. Service Kit Kawai RN88 PWB Assy KKB-039(2)This service kit replaces the circuit boards and contact rubbers in the Kawai WR88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-039(2).The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA67Kawai CA78Kawai CA79Kawai CA97Kawai CA98Kawai CA99Kawai CS8Kawai CS11 

1 pcs. Kawai Volume Slider Knob for CA/CN Serie Black1/Ivory1Kawai CA95Kawai CN23 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Pianos 

1 pcs. Relaissuitable forKawai KSP10Kawai KSP20Kawai KSP30

Stereo Slider with 30mm Travel. Suitable for Volume Slider forKawai ES6The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

LCD Display with LED Backlight replacement including cable Kit forKawai K5000 We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Battery with 3 solder pins suitable for  Kawai K5mimportant technical note:the original battery installed in the Kawai K5m has  2 soldering legs at the positive pole with a distance of 8 mm. The battery offered here has 2 soldering legs at the positive pole with a distance of 10 mm. It is possible to bend the two soldering legs forward so that they fit into the holes on the board.The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Attention: Shipping for Europe onlyInformation for handling old Battery's

Black LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5m We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs yellow-green LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5mWe offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  yellow-green BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation the Display in Kawai K5:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs white LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5mWe offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  white BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Kawai Ring for Round KnobKawai ES-7Kawai MP-8Kawai MP-11 Technical Description of Kawai Knob:This ring for Round Knob is placed on the axis of the rotary potentiometer and pressed into the housing. The ring centers the axis of the rotary potentiometer in your Kawai Stage Piano.

1 pcs. Kawai Volume Slider KnobKawai ES-7Kawai ES-8 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Stage Pianos

1 pcs. Service Kit Kawai RJ88B PWB Assy KKB-034(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RJ88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai ES110Kawai ES120

1 pcs Kawai INLET Board KEP-389(22)THis PCB is used inKawai CA95Safety note: This assembly is in direct contact with 230V AC mains voltage. Only for qualified electricians.Electrical properties of KEP-389(22):Voltage: 230 V ACFuse on Board: 1,6Afor use in EuropePractical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Service Kit Kawai WK88 PWB Assy KKB-008This service kit replaces the circuit boards and contact rubbers in the Kawai WK88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-008.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA13Kawai CA63Kawai PW9Kawai PW1000

1 pcs. Kawai Pedal screwDimensions: M8 x 15 mm Note: 

1 pcs. Kawai Rotary Potentiometer for pitch bendThis poti is used in

1 pcs. Kawai Pitch Bend Assembly for MP series Complete assembly for pitch bend in the Kawai MP series. This assembly fits models from MP7 onwards. A different assembly was used in older models, MP6 and earlier. Individual parts from this assembly will certainly also fit in the older pitch bend assemblies.  

1 pcs. Kawai Rotary Potentiometer for Modulation