Keyboard

1 pcs Yamaha contactrubber Wood key 12 contactsIn this wooden keyboard installed by Yamaha only in very few models, a contact rubber was used in two places.Once there is a contact rubber in the front under the wooden keys. A second Kontaktugmmi sits in the back under the hammers.Here it is the contact rubber at the front under the keys. No more rubbers available.Contactrubber for one actave with 12 contacts.Only some few parts availableThis rubber was used inYamaha CLP-175Yamaha CLP-990Yamaha CVP-900

Replacement Keys for Yamaha NL2 AI CW KeyboardThese Keys fits for all Yamaha NL2 AI CW keyboards.Yamaha NL2 AI CW keyboard is used in:Yamaha CLP-585Yamaha CVP-709Note on the keys supplied:The keys are delivered without the black rubber that is mounted at the bottom of the key. The black rubber is taken from the old key. The rubber is clicked in and can be easily replaced. The Yamaha NL2 keyboard is a velocity-sensitive keyboard. The keys have a wooden core that is covered with plastic.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

1 pcs. Yamaha NL4 Stopper U88 LowerThis NL4 keyboard is used in these modells and others:Yamaha CLP-675Yamaha CLP-685Yamaha CLP-775  

1 pcs. new Korg RH4 PCB Assy KeyboardThis keyboard is used inKorg Krome 88Korg SP-280RH-4, RH-4L or RH-4HL—one letter—big difference. Please note.this is set of three contact PCB as used in Korg RH-4.This set contains LOW, MID ans HIGH contact PCB  - KLM-2949/2950/2951 The circuit board is partially supplied with a blue protective film over the contacts. This protective film must be removed before installation. 

1 Pc. Korg RH3 Bottom Keystroke Felt for Electric Piano KeyboardsThis felt is used by Korg in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times. 

1 pcs. Kawai 5 mm Felt green for E-Piano KeyboardThis felt is used by Kawai in the wooden keyboards, such as those built into the CA665. This felt sits on the back of the keyboard. This is the felt on which all the buttons rest in the rest position.This felt has no adhesive film. For sticking there exists very good and very thin double-sided adhesive tapes from 3M. For example 3M™ Double Coated Tape 9448HKB

Keys, unweighted for Roland SK9 KeyboardThis part fits for all Roland SK9 KeyboardsRoland SK9 Keyboard is used inJP-8000Color/tint: pure white

Contact rubber for Roland SK9 Keyboardstechnichal dimensionsNo of contacts: 7,8, 12 or 13Width: 21 mmheigh: 9.8 mm

Replacement Keys for Yamaha NL2 KeyboardThese Keys fits for all Yamaha NL2 keyboards.Yamaha NL2 keyboard is used in:Yamaha CP5Note on the keys supplied:The keys are delivered without the black rubber that is mounted at the bottom of the key. The black rubber is taken from the old key. The rubber is clicked in and can be easily replaced. The Yamaha NL2 keyboard is a velocity-sensitive keyboard. The keys have a wooden core that is covered with plastic.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Key's 16MX Style suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-SX700Yamaha PSR-SX900Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

Replacement keys, weighted for Fatar TP/8+ KeyboardFatar TP/8+ keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points. The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked. The keys are in color cream white.

Hammer for Fatar TP10 KeyboardsFatar Keyboards are used by Korg, Clavia Nord, Kurzweil, GEM

Replacement keys for Fatar TP10 weigthed Keyboard Fatar TP10 ABS weighted keyboard is a touch sensitive keyboard with Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant ABS. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The unweighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

Replacement Hammer for Yamaha GHD Keyboard The Yamaha GHD Keyboard is used in two different configurations.The Keyboard is availabel with a 1 zone Hammeraction and with a 4 Zone Hammeraction.Here you will find the different Hammer for the GHD Keyboard

Replacement keys for Fatar TP10 ABS Keyboard Fatar TP10 ABS keyboard is a touch sensitive keyboard with Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant ABS. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The unweighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: pure white

1 pcs. Contactrubber 16L V2 suitable for Yamaha This keyboard is used in these modells: Yamaha PSR-300Yamaha PSR-310Yamaha PSR-320Yamaha PSR-400Yamaha PSR-410Yamaha PSR-420Yamaha PSR-500Yamaha PSR-510Yamaha PSR-520Yamaha PSR-4500Yamaha PSR-460012P contactrubber is no longer available.

Spare parts for Roland PA4 Keyboard Does a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken.This part fits for all Roland PA4 KeyboardsRoland PA4 Keyboard is used inRoland HP-237eRoland HP-555GRoland HP-7700Roland KR-370Roland KR-375Roland KR-570 und KR-575Roland KR-770Roland KR-1070Roland KR-4300Roland RD-500The S-Key fits in Keyboard PA4 AND PA4APlease have a look at the video for replacing Hammers.

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(1)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040. The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CN17Kawai KDP110Kawai KDP120Kawai ES520Caution during disassembly: The operation LED on the front of the piano is plugged into the sensor board.

1 pcs. Service Kit Kawai RG88B PWB Assy KKB-015This service kit replaces the circuit boards and contact rubbers in the Kawai RG88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.This set of boards replaces the board KKB-015 The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai KDP-80Kawai KDP-90Kawai ES100Kawai CN31Kawai CN32Kawai CL-15

1 pcs. Yamaha NL4 Guide CapThis rubber fits in these keyboardsYamaha NL4This rubber sits at the head of the key guides and is used for the black deeds and for the white deeds.Color: black

1 pcs.  Yamaha FFC cable for GHL KeyboardKeyboard connection cableThis cable connects Yamaha GHL Keyboard with Mainboard   

1 pcs. Service Kit Kawai RN88 PWB Assy KKB-039(2)This service kit replaces the circuit boards and contact rubbers in the Kawai WR88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-039(2).The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA67Kawai CA78Kawai CA79Kawai CA97Kawai CA98Kawai CA99Kawai CS8Kawai CS11