Keyboard

Replacement Keys for Technics KeyboardThese Key's are used inTechnics KN-720Technics KN-920Technics KN-930Technics KN-1400Technics KN-1500Technics KN-1600Technics KN-2400Technics KN-2600This are new key'sColor: whitemechanical construction:This Keys are only available as complete set for one Octave. There is one part for a middle Octave, one part for the first and one part for the last Octave.

One Octave white Replacement Keys for Yamaha GHD KeyboardThis set contains:1 x A1 x B1 x C1 x D1 x E1 x F1 x GNote on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key. 

1 pcs. Yamaha GHL Actuate Rubber This rubber is used on every singel key as stopperColor: black

1 pc. Korg ESK7 Rubbercontact 6P x1 Features:    Height of contacts: 8 mm    width of the strip:   15 mm    Length of the strip: 80 mm    Number of contacts per strip: 6 contactsOne contact strip consists of 6 contacts and thus covers halfe octave. 

1 pcs. Kawai  Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are returning to zero position. In the drawing it is the two felts with the number 34This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.  

Replacement–set for broken key guides on Roland SK3 KeyboardsWith Roland Synthesizer and electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for old Roland instruments, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Roland key guides in an identical way. Therefore we offer you a matched spare part set for your Roland piano in our store.So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. YIncluded in the set:– Matched tube suitable for a keyboard with 88 keys.Tecnical advice for Grease:As we know there was no use of grease in these old keyboards. 

Contactrubber for Roland MSK1/MSK2 KeyboardThis Keyboard is used inRoland Juno D   ( NEW TYPE !! CARBON CONTACT PCB )Roland Juno DiRoland Juno GRoland Juno Gi 

Spare Parts for Technics E-Piano Keyboard, 88 Key hammeractionThis parts are usedTechnics Key-Guide:we know this problem with key guides in Technics E-Pianos. For this we have designed this alternative replacement key guide:Technics Key Guide  

1 pcs. Yamaha Spezial Keyboard grease VAG94800, white 25g Original Yamaha plastic grease for Keyboards.Color is white and will be delivered in a 25 gramm portion.On Yamaha NL4 Keyboards are used 5 different grease.This grease can also be used on Yamaha keyboards at key guides.Special forPSR-SX700 black keyPSR-SX900 black key 

1 piece Contact rubber 13 points for Korg LS-P88W KeyboardContact high:  9,8 mmStrip bright:   21,5 mmStrip length:  178   mmNumber of contacts: 13A contact strip consists of 13 contacts and there are only these 13 contact rubbers for this keyboard. However, 12 contact rubbers are predominantly used in the keyboard. The contact rubber is then shortened accordingly (cut off).For complete replacement of the rubber contact strips in a keyboard with 88 keys 7,3 contact strip are needed.

1 pcs. Yamaha GHD A88 Keyboard complete--- shipping only in germany, sorry  -----Please ask if this keyboard is the right one for your e-piano model.This keyboard was used for many years in the vast majority of Yamaha electric piano models.The replacement of the entire keyboard is from a certain age of the electric piano well worth considering.For example, if your original keyboard is affected by the grease problem, you have here an alternative after desen exchange you no longer have to worry about the keyboard.If the keyboard is not in stock, we can order the keyboard from Yamaha. There may be a delivery time.

1 pcs. new Contactrubber for Yamaha GHL KeyboardThis keyboard is used in these modells:Yamaha P-35Yamaha P-70Yamaha P-105Yamaha AriusYamaha MOXD8Yamaha MOXF8Color of these Contactrubber may be different.

1 pcs. Yamaha contact PCB for Yamaha GHL88 KeyboardThis keyboard is used inYamaha P-115Yamaha P-125Yamaha YDP-S30Yamaha YDP-143

Replacement Keys for Yamaha GH3 GKS KeyboardThese Keys fits for all Yamaha GH3 GKS keyboards.Yamaha GH3 GKS keyboard is used in:Yamaha Clavinova CLP-440Yamaha Clavinova CLP-525Yamaha Clavinova CLP-625Yamaha Clavinova CLP-635Yamaha Clavinova CVP-605Yamaha Clavinova CVP-701Note on the keys supplied:The keys are manufactured in two different production facilities at Yamaha. Depending on the production of the keys, they have different features. One variant is supplied with black rubber, the other variant without black rubber. In the second case the black rubber has to be taken over from the old key. The key with rubber also has a small fat reservoir. The Yamaha GH3 keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

1 pcs Yamaha FSX Keyboard FFC cable 23 Pol 1,25Keyboard connection cableLength = 130 mmBoth sides have the same connector  

1 pcs. Kawai  Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are pushed For better mounting this felt is equipped with an adhesive tape.  

Replacement keys for KAWAI Keyboard RH-88Bsuitable forKawai CN33Kawai CN34Kawai ES7Kawai MP7The Kawai RH88B keyboard is a velocity sensitive keyboard with 4-zone hammer action.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RH88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88 

1 pcs. Kawai 7 mm Felt green for E-Piano KeyboardThis felt is used by Kawai in the wooden keyboards, such as those built into the CA65. This felt sits on the front of the keyboard. For better assembly, this felt is equipped with an adhesive tape. The same felt is used in the Kawai ES1 stage piano. Here it is the hammer felt with the spare part number: 813174 

Replacement keys and spare parts for Fatar TP/8S Keyboard, weightedWe would like to expressly point out that the keys are used. Fatar keys tend to darken and yellow significantly. Under certain circumstances, it may be that we currently only have very darkened keys in stock.Fatar TP/8S keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white. 

Replacement keys for Fatar TP40 GH Keyboard (used) Fatar TP40 GH keyboard is a touch sensitive keyboard with 3 Zone Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The unweighted keys have a length of 21.5 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 1.2 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. A movable hook is hooked into this opening. 3-Zone Hammer Mechanics:A 3-zone hammer mechanism is a little bit unusal for high-quality e-piano keyboards. Normaly there will bee 4 zone hammer mechanism. By means of the three different zones the Manufacturer Fatar try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are three different hammers with different weight.The keys are in color white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle. At the moment we have used keys in a very good condition.These keyboards are placed in the products of Doepfer (well known for their Master Keyboards and modular Synthesizer) and Waldorf.

Replacement Hammer for RH4 KeyboardThe RealHammer 4 (RH4) keyboard is a 4 zone hammer mechanism.This Keyboard is also known as "Natural weighted Hammer Action".

1 pcs. Yamaha NL2 Guide CapThis rubber fits in these keyboardsYamaha GH3Yamaha NL2This rubber sits at the head of the key guides and is used for the black deeds and for the white deeds.Color: black

Replacement Keys, weigthed for Korg Pa900 KeyboardThese Key's are used inKorg Pa900This are new key's Color: white mechanical construction: This Keys are only available as complete set for one Octave. There is one part for a middle Octave, one part for the first and one part for the last Octave.

1 pcs. Contact rubber forKorg Pa500Korg X50This are brand new contact rubbers.A contact rubber consists of 12 or 13 contacts and covers an octave. A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.