Keyboard

1 pc. Contact rubber for old Roland keyboard Features:    Height of contacts: 8 mm    width of the strip:   16 mm    Length of the strip: 162 mm    Number of contacts per strip: 12 contactsOne contact strip consists of 12 contacts and thus covers one octave.This contact rubber has a notch to allow the contact rubber to be split. The division occurs with 7/5 contacts 

Wheighted Key's suitable for Yamaha FSX KeyboardThis keyboard is used in these modells:Yamaha Motif XS6Yamaha Motif XS7Yamaha Tyros 2Yamaha Tyros 3Yamaha Tyros 4Color: whiteThis key is new

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition  

1 pcs. Kawai  upper limit Hammer Felt for E-Piano Keyboards HAMMER UPPER-LIMIT CUSHIONThis felt is used by Kawai in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. In the Drawing it the felt with the number 36 For better mounting this felt is equipped with an adhesive tape.Material name: KBFZ-0125 Attention: For quite old keyboards, the felt has a different height!!!The old felts have a height of 12 mm while the current felt has a height of 10.5 mm. 

Spare parts for Roland SK7 KeyboardThis part fits for all Roland SK7 KeyboardsRoland SK7 Keyboard is used inD-70JD-800U-20 This keyboard is no longer available from Roland. Production discontinued. 

Parts for Fatar KeyboardsThese parts fits forFatar TP/40 Here you will find springs, felts, P.C.B., screws

1 pcs Korg RH3 Keyboard Spring 

Replacement Keys and spare parts for Yamaha AE KeyboardThis part fits for all Yamaha AE Keyboards.Yamaha AE keyboard is used inKorg C-15, C-25, C-30, C-40, C-400, C4000, C-50, C-5500,C6000, C6000MKorg SG-ProXYamaha CLP-122, CLP-550, CLP560Yamaha CVP-20, CVP-50, CVP-55, CVP65, CVP85, CVP87Yamaha AE Keyboard is a very old and one of the first Hammer Action Keyboards. A note on the contact rubbers: The contact rubber for the 88'er keyboard is available in the colors pink and green. The contact rubber in pink is missing 2 holes in the rubber that serve as a mechanical guide.Contactrubber in green is out of production.The interruptions in the contact rubber are not symmetrical. 

1 Set. Kawai Sliptape, prepunchedSet with 100 pcs.Size of a sliptape section: 4x12 mm.For old keyboards, the sliptape should be placed in the center because the sliptapes used in earlier times has been larger.This pre-cut sliptape fits only for hammer in plastic keyboards. Do not use this Sliptape in Kawai Wood Keyboards. 

Parts for Fatar KeyboardsThese parts fits forFatar TP/7SFatar TP/8SFatar TP/9SHere you will find springs, felts, P.C.B., screws

Spare parts for Yamaha C61KG KeyboardYamaha C61KG Keyboard is used inYamaha QS-300Yamaha QS-700Yamaha SY-22Color/tint: creme white

1 pcs. Contact rubber for Kawai WN88 KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high:  11 mmStrip bright:   25 mmStrip length:  164  mmNumber of contacts: 12These contactrubber for e-pianos has been used in:Kawai CA48Kawai CA65Kawai CA95Kawai CS7Kawai CS10Kawai MP11Kawai VPC1A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

Replacement Keys for Korg LS-88 KeyboardLS-88 keyboard is used inKorg Kronos 2 LS 88This keys are weightedColor: cream white (Ivory)The RealHammer 3 keyboard (RH3) is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

Fatar TP100 lower hammer stop felt..This felt is used by Fatar in the TP100 keyboard and dampens the hammers when they return to their resting position after a key is released.In the drawing, the felt marked in red (memory foam).This felt consists of several layers of different materials.For easier installation, this felt is equipped with adhesive tape.  

Replacement keys and spare parts for Fatar TP/7 Keyboard Fatar TP/9 keyboard is a touch sensitive keyboard with unweighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 14,5 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  not worked out. The distance from the front side of the key is 9,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white.

1 pcs Contact rubber SK25 for Technics E-PianoFor the complete exchange of the contact strips in a keyboard with 88 keys 7 contact rubbers with 12 contacts and 1 contact rubber with 4 contacts are required.

Contact rubber 12 points for RH-4L KeyboardRH-4, RH-4L, or RH-4HL—one letter—big difference. Please note. Contact high:  7,5 mmStrip bright:   22,3 mmStrip length:  165   mmNumber of contacts: 12Roland Part Number: 4671145A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 88 keys 7 contact strip + 4 pins are needed. The remaining 4 contacts can be easily separated from a rubber contact strip with 12 contacts. A notch is provided in the rubber contact strip after every four contacts for this purpose. 

1 pcs. new Contactrubber for Yamaha GHD KeyboardThis keyboard is used in these modells and others:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha CVP-207Yamaha CVP-209Yamaha CVP-401Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200Color of these Contactrubber may be different.

FFC cable set for Roland PHA KeyboardsKeyboard connection cableThis set conists of two cables which connect the Keyboard with the Mainboard1 x 16P1 x 22PLength = 600 mmBoth sides have the same connector  

1 pcs. Yamaha GHL Stopper U88 This GHL keyboard is used in these modells and others: Yamaha P-70Yamaha YDP-131

1 pcs. Yamaha GHL Stopper L88 - lower FeltThis GHL keyboard is used in these modells and others:Yamaha P-70Yamaha YDP-131 

1 pcs. Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are used and in a good condition.Important NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Korg RH4 Keyboard feltsRH4 keyboard is used in Korg SP-170Korg SP-280Krome 88All felt are fittet with self adhesive tape. For complete replacement of one 88 key keyboard you will need:2x Felt upper5x Hammer felt 12P - L11x Hammer felt L21x Hammer felt L3 

1 pcs. Kawai lower hammer Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the hammers when they are returning to zero position. In the drawing it is the felt with the number 37This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.