Products

Spare Parts for SK25 Keyboard Here you will find parts for SK25 Keyboard, like Felts, Springs and Contact Rubber

1 pcs. Replacement keys  for Fatar TP/9S Keyboard ,unweightedFatar TP/9S keyboard is a touch sensitive keyboard with unweighted keys. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points. The unweighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked. The keys are in color cream white.

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forE-mu E-IVWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:This work is to be done only by technically, best electrotechnically savvy people.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. new Blue LCD Display with LED Backlight replacement including cable Kit forE-mu E-IV We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:This work is to be done only by technically, best electrotechnically savvy people.  Installation service:We are also happy to install the display for you. Please ask.  

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forE-mu E-IVWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original. Color: White Character  /  black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:This work is to be done only by technically, best electrotechnically savy people.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forE-mu E-IV We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character / yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:This work is to be done only by technically, best electrotechnically savvy people.Installation service:We are also happy to install the display for you. Please ask.   

1 pcs. Battery holder  for 1/2AA batteryAttention: Shipping for Europe only Technical Description:  Information for handling old Battery's

1 pcs. double MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5054 rotated 180 degreeused by: KorgRolandYamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. LCD Display brandnew in amber forRoland JD-800this is  a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Socket JST PH 14 pin Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

1 pcs. CR2430Attention: Shipping for Europe only Technical Description:The dimensions of CR2430 are diameter of 24 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

1 pcs. Replacement stereo rotary potentiometer 14mm suitable forYamaha CLP-150Yamaha P-250Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. The axis rises with 13 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. white LCD Display with LED Backlight replacement for ALESIS AndromedaWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:   black Character / white BackgroundDelivery scope:Display ready wiredMounting partsBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:This work is to be done only by technically, best electrotechnically savvy people.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. OLED Display brandnew in white forRoland JD-800this is  a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

Blue LCD Display with LED Backlight replacement including cable Kit forRoland A-50Roland A-80We offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  white BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.

1 pcs. OLED Display brandnew in blue forRoland JD-800this is  a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

Molex Poke In Socket 14 PolThis connector series from Molex is today out of production.  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Molex Poke In Socket 12 pinThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Molex Poke In Socket 10 pinThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Molex Poke In Socket 2 PolThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Molex Poke In Socket 4 PolThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Molex Poke In Socket 5 PolThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Molex Poke In Socket 6 PolThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Molex Poke In Socket 7 PolThis connector series from Molex is today out of production.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.