Products

1 pcs. Socket 15 pin for TechnicsThis socket is used in some Technics e-Pianos for Pedal Cable.Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

1 piece Gold-Cap 0.22 F/5,5 V Manufakturer: Elna or Panasonic  

1 piece Electrolytical Capacitor 100uF/400V for Switching Power SupplyManufakturer: Nichicon LGJ LowProfile Here i offer spezial Capacitor from manufakturer Nichicon.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. ""

1 pcs. Battery with 3 solder pins suitable for  Kawai K5mimportant technical note:the original battery installed in the Kawai K5m has  2 soldering legs at the positive pole with a distance of 8 mm. The battery offered here has 2 soldering legs at the positive pole with a distance of 10 mm. It is possible to bend the two soldering legs forward so that they fit into the holes on the board.The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Attention: Shipping for Europe onlyInformation for handling old Battery's

1 pcs. Rotary potentiometer for LCD Contrast adjustment  The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. new Blue LCD Display with LED Backlight replacement forALESIS Andromeda A6We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character on Blue BackgroundAttention: The colour of the display shown may differ slightly from the original, e.g. due to your screen settings. Delivery scope:Display, prepared ready to plug inMounting partsBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beeping) is eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:This work should only be carried out by people who are technically, preferably electrotechnically, experienced.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. 1,44 MB Disc ALPS DF354H 

Replacement Hammer for TP40GH KeyboardThe TP40 GH (graded hammer action) keyboard is a 3 zone hammer mechanism.

Replacement Keys for Korg Pa50Color: whitemechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

NEW Replacement Keys, weighted for Roland SK8 Synthesizer Keyboardused inRoland XP-30Roalnd XP-80This are new Key's without "Red Glue-Problem" 

Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white. 

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: creme white (ivory)

Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.

1 pcs.  key contact board suitable FS keyboardsThis key contact is usedWidth: 6 cmheigh: 1,4 cmContact Resitance: lower 1 Ohm

Replacement Keys, weighted for Roland SK8-P Keyboardused inRoland KR-650Note: This keyboard has the problem that the glue for the key weights does not fully cure. This causes the glue to "flow" and the key weights to fall out. Never store instruments with this problem upright. Then the glue flows over all the keys and glues them together. This is the so-called "red glue problem". We currently have buttons with triggered weights that we add separately in stock. 

Parts for Pedal Assembly Technics E-PianosComments on the article:That's why the pedal is only available as an article pedal center.We deliver the spring that we currently have in stock.The spare parts are usually used. Please see specification for exact item.

versenkbare Tastaturabdeckung für Technics E-PianosTastaturabdeckungMontageschiene AluminiumStange, AluminiumHalter für StangeZahnradBei E-Pianos oder Digitalpianos von Technics ist es Standard das es eine versenkbare Tastaturabdeckung gibt. Die Tastaturabdeckung wird leicht angehoben und rollt dann sehr leicht in das innere des Pianos und gibt die Tastatur frei.Die Tastaturabdeckung ist ein Deckel der aus dem gleichen Material gefertigt ist wie der Korpus des Pianos. In der Regel ist das Spanplatte oder MDF-Platte. An der Vorderseite ist wahlweise eine Aluminiumschiene oder ein Holzsteg befestigt durch den der Deckel im geschlossenen Zustand auf dem Korpus des Pianos aufliegt. An der Rückseite ist eine durchgehende Aluminiumstange montiert. An jedem Ende dieser Stange ist ein Zahnrad aus Kunststoff befestigt. Diese Zahnräder bewegen sich auf Zahnstangen die im innern des Pianos am Korpus befestigt sind.

Replacement keys for Fatar TP/30 Keyboard Fatar TP/30 keyboard is a touch sensitive keyboard with Hammer Action. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine. contact detection is done via 12 pin contact rubber strip with two graphite points.The unweighted keys have a length of 21.4 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

1 pcs. Contact rubber forKorg Pa500Korg X50This are brand new contact rubbers.A contact rubber consists of 12 or 13 contacts and covers an octave. A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

Contact rubber Version 1 for Technics KeyboardThis contact rubber version is run without any maintenance bumps. The contact rubber is held in a special frame.For the complete exchange of the contact strips in a keyboard with 61 keys 4 contact rubbers with 12 contacts and 1 contact rubber with 13 contacts are required.Contact high:  9.5 mmStrip bright:   26 mmStrip length:  164 / 179   mmNumber of contacts: 12 or 13A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

1 pcs. Contactrubber PSR1 suitable for Yamaha This contact rubber was only used in very, very few models. Please check your instrument first to see if it is the right rubber.

Spare parts for Kawai RF-88 Keyboard Here you will find different parts for Kawai RF-88 Keboard. Cusion, FeltHammerKey Guide

Parts for Fatar KeyboardsThese parts fits forFatar TP/100LR Here you will find springs, felts, P.C.B., screws

Black LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5m We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.