Products

1 pcs AC Power Inlet PA125 with Solder Lug   -  Discontinuedtechnical Dates:Termination Solder Lug2 polThis is the typical Roland power socket used by Roland for many decades. Today, this socket is no longer available at Roland. Therefore only used power sockets are offered here. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

1 pcs. new Blue LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth::The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask. 

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-SynthWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask. 

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character / yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals.Installation service for LCD Display:We are also happy to install the display for you. Please ask.  

Blue LCD Display with LED Backlight replacement including cable Kit for Roland DJ-70 We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forRoland DJ-70We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Transformer Technics QTPG1M029AThis Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

1 pcs. Transformer Technics PR603This Transformer is usedd and in a good condition.suitable forTechnics PR603technical Hint:The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

AC-IN Circuit QJBG2164 for Technics, usedThese board is tested by us and fully working. We sell it with one year warranty. 

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. used by:YamahaThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Tactile switch with yellow button suitable for The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

Mainboard for Roland FP8 Stage PianoThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

Mainboard for Roland HP-2900 E-PianoThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

Complet replacement set potentiometer for Yamaha RM1xconsist of:8  pcs  rotary poti, vertikal, 12mm, Center click + TAP4  pcs  Encoder, 16mm1  pcs  Stereo Volume rotary pot, 14mmOperational Life for all pot's: 15.000 CyclesOperational Life for all Encoder: 50.000 CyclesMounting instruction Yamaha RM1x:in the RM1x Yamaha has installed a potentiometer without thread. The potentiometer I offer here can also be used in the RM1x. However, the housing holes must be drilled out by 1 to 2 mm and the axis must be shortened by 5 mm. The big advantage of this solution is that I think that threaded potentiometers are much more durable than unthreaded potentiometers. Undeniably, the axis is guided and supported by the thread much more stable.In the pictures you see a test installation I have made.The pot's  are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

tactile switch set suitable for modelsAkai MPC-3000Akai Part Number:  ES-410552 Delivery quantity: 57 pieces The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

Fader knob suitable for:Korg M3Sold out: This part is no longer suitable

Mainboard for Yamaha P-45 Stage PianoThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

1 pcs. Diode Keyboard Matrix Kawai 

1 pcs. Digital-Analog-Converter for audio application for Roland E-PianosPCM56P This part is used from RolandRoland      part number:15209122   Resolution:                    16bitInterface:                      seriellConversion rate:            666kS/sNumber of DAC outputs: 2Number of channels:      1Case:                           DIP16warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a DIP 16 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 16 bit resolution. The conversion rate is 666kS / s. For operation, no external components, such as temperature compensation or similar is required.It is a symmetrical supply voltage of +- 5V to +- 12V needed. Practical tips:These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Please be carefull because of static charing

1 pcs. Socket 5 pin for TechnicsThis socket is used in some Technics e-Pianos for Pedal Cable.Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

1 pcs external Power Supply Unit suitable for Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 5.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

Recapping set for Yamaha TX802Attention: 110V US VersionThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha TX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for complete recapping of Yamaha TX802 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. Switching Power Supply used for Korg M1230V Version

1 pcs. Technics Screw XYN4+F10 KeyboardscrewThese screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Size: M4 x 13 mmLocation: Keyboard housingScrew XYN4+F10 in the Service Manual.