Products

1 pcs. PLUNGER COIL ASSY(A) MX100ASemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. PLUNGER COIL ASSY(B) MX100ASemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. COIL ASS'Y (A) L=60 BL SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. COIL ASS'Y (B) L=35 WH SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Clavia Nord Pitch Stick short cable 

1 pcs Yamaha FUSTB AC-IN Board

1 pcs. Yamaha Pedalcable No5   -- Discontinued --This cable with plug is used by Yamaha for different E-Piano Modells.The cable has a 6-pin plug with 2 rows on the side to the electric piano, i.e. 2x3. On the side to the pedal there is a 6-pin JST socket in 1 row.This cable is used in 

1 pcs. Clavia Nord 3 way Power Supply IEC14 12P Connector  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 12-pole ribbon cableThis Power supply deliver:+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

1 pcs. AKAI MPC500 OLED Display brandnew this is  a plug in ready Display replacement for AKAI MPC-500. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation:We deliver this OLED dislpay for the AKAI MPC-500 synthesizer ready for installation. All necessary cables are already soldered on. You will only need a screwdriver for the installation.- Recommendation: The device is very compact inside and there is very little space. Special care must therefore be taken when installing the display.- Instructions are enclosed with the display.The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 piece Fuse 5x20 mm 250V T0.4A time-lag  

1 pcs. Yamaha FUERP ASSY #3212 AC-IN BoardFor Europe only: 230VAC

1 pcs. TRANSISTOR 2SC2291Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. black LCD Display brandnew forYamaha TX16Wthis is  a plug in ready Display replacement for Yamaha TX16W. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired.The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours.

1 Pc. Korg RH3 Bottom Keystroke Felt for Electric Piano KeyboardsThis felt is used by Korg in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times. 

1 pcs. CR2032 with 3 solder pin suitable forRoland MKS-50Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The positive pole owns two interconnected soldering legs at a distance of 10 mm. The negative pole has one solder leg.Practical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs Clavia Nord PSU Transformer 22770 Electrical properties of 22770:Primary: 230 V AC or 2 x 115 V ACSec: 4 x 7,5 Volttransformer for PCB mountingPractical advice:Plug of the device. Don't work under Voltage. 

Nord LED lens, 6 arrows The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

1 pcs. Panasonic Battery holder CR2032 pinspacing 20 mmWe offer a battery holder that is suitable for standard CR2032 button cells. The advantages of this battery holder are its very secure battery retention and good pin spacing for circuit board mounting.This battery holder is used in many musical instruments.Technical Description of Panasonic Battery Holder:The battery holder is designed for circuit board mounting and has one solder leg for the positive pole and one solder leg for the negative pole.The distance between the two solder legs is 20 mm.A space measuring 25 mm x 26 mm is required for installation. 

1 pcs. Korg Oasys Backlight Replacement für LCD DisplayThe display in the Korg Oasys is a classic LCD display with backligh. The backligh is provided by small fluorescent tubes. These fluorescent tubes are also known as CCFL tubes.When these CCFL tubes reach the end of their service life, the usual effect is that nothing can be read on the LCD display of the Korg Oasys. The first impression is usually that the display is defective.How can I check whether the display is completely defective or whether only the backlight has failed?If only the backlight has failed, it is usually possible to see the text if you look very closely, usually from a very steep angle. Users usually know what is normally displayed on the screen. It is also possible to shine a flashlight on the display. Then the text is usually still quite easy to see. We offer a replacement kit for the backlighting in the Korg Oasys LCD.With this kit, you can replace the CCFL tubes with modern LED strips. The LED strips come with the control electronics that we supply.The kit consists of:LED stripsControl boardsAssembly instructionsNotes on installing the backlight in the Korg Oasys:Please be aware that this modification requires you to tamper with the LCD display. Doing so may result in the complete destruction of the LCD display. This work requires calmness, patience, and perseverance. It is also important to work with precision.Please also note the separate note on CCFL tubes below.Safety advice to CCFL tubes:These neon tubes are very sensitive. Handling and mounting must be done very very carefully.The fluorescent tubes are operated with a high voltage of approx. 180V AC. Please observe the corresponding safety regulations of the VDE.Risk of electric shock. 

1 pcs. CR2032 with solder pin suitable for   Casio CZ-1 Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. Practical tip: The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. Information for handling old Battery's

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

1 pcs. Battery with solder pin suitable for  Sequential Circuits Propeht 5Please check right polarity! Attention: Shipping for Europe only The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs. Encoder 22 mm with Detent suitable forNord Modular G1Nord Modular G2  - Main DialPractical advice:The encoders offered here come from the same manufacturer as those used by Nord. There are compared to the original small deviations in design:Pin distance here is 2.5 mm compared to 5 mm for the originalOriginal encoder does not have an "anti-rotation pin". This anti-rotation pin must be cut off at the new encoder.Mounting clip is not needed in many cases at Nord and can be removed. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKorg T1Korg T2Korg T3We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementPlease let us know your instrument. The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg T1,T2 or T3:The instrument must be disassembled almost completely to reach the display.Small soldering job: For the new display a jumper has to be soldered on the audio board.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.We are proud to offer the thinnest displays available on the market.