Products

1 piece Elko 33uF/50V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in newer Roland instruments.used by:Roland These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Complet replacement set tactile switch for Yamaha RM1xconsist of:45 pcs 9,5 mm hight27 pcs Keypad switchOperational Life for all switch: 1.000.000 CyclesThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

Replacement keys for Fatar TP10 weigthed Keyboard Fatar TP10 ABS weighted keyboard is a touch sensitive keyboard with Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant ABS. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The unweighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

1 pcs. Kawai 5 mm Felt green for E-Piano KeyboardThis felt is used by Kawai in the wooden keyboards, such as those built into the CA665. This felt sits on the back of the keyboard. This is the felt on which all the buttons rest in the rest position.This felt has no adhesive film. For sticking there exists very good and very thin double-sided adhesive tapes from 3M. For example 3M™ Double Coated Tape 9448HKB

1 pcs blue LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5m We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Battery holder for CR2032Attention: Shipping for Europe only Technical Description:  Information for handling old Battery's

1 piece Elko 4,700uF/35V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

Replacement keys for Fatar TP10 ABS Keyboard Fatar TP10 ABS keyboard is a touch sensitive keyboard with Hammer Action.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.A pressure point simulation is entered in the keyboard variant ABS. This is done by means of a nose formed on the Key, which protrudes downwards into the keyboard frame. The unweighted keys have a length of 21.8 cm and a width of 2.24 cm. The thickness of the keys is 1,5 cm.The contactor, which presses on the contact strip is 2.8 cm deep. The distance between the front contact and the front of the keyboard is 14 cm. The keys are in color cream white.The plastics used by Fatar tend to darken very strongly and the plastic becomes somewhat brittle.

Keys, unweighted for Roland SK9 KeyboardThis part fits for all Roland SK9 KeyboardsRoland SK9 Keyboard is used inJP-8000Color/tint: pure white

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: pure white

1 pcs. Contactrubber 16L V2 suitable for Yamaha This keyboard is used in these modells: Yamaha PSR-300Yamaha PSR-310Yamaha PSR-320Yamaha PSR-400Yamaha PSR-410Yamaha PSR-420Yamaha PSR-500Yamaha PSR-510Yamaha PSR-520Yamaha PSR-4500Yamaha PSR-460012P contactrubber is no longer available.

1 piece Elko 2,200uF/50V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

Pedal Assembly for Yamaha E-Pianos  WV9125 Practice tip:Apparently, this socket has always contact with the ground. In the case of the spare part supplied by Yamaha Yamaha then sees this vertical socket replaced by an angled socket.

1 pcs. Slidepotentiometer with center click suitable for Yamaha CLP-150Yamaha CLP-170The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Flash ROM 16Mas replacement for MBM29LV160BE90TN Mechanical Description:This flash rom is housed in a TSOP48 package and is designed for SMD mounting on a circuit board. This part sensitive to static charge  

1 pcs. triple MIDI DIN socket female 5 pin for printed circuit - Roland MIDI3-NSJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. The original MIDI jack in your instrument will certainly look somewhat different. Today's possible replacement of this 3-way MIDI jack looks slightly different, but is identical in function.  used by:Roland These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. 14 pin FFC socket with 1.25 mm pitch14 pinPitch: 1.25 mmLength: 21,05 mmdeepth:  4,80 mmhight:      7,80 mmTechnical descriptionPraktikal tip:In these socket the cable cable have just to be pluged in.

Spare parts for Roland PA4 Keyboard Does a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken.This part fits for all Roland PA4 KeyboardsRoland PA4 Keyboard is used inRoland HP-237eRoland HP-555GRoland HP-7700Roland KR-370Roland KR-375Roland KR-570 und KR-575Roland KR-770Roland KR-1070Roland KR-4300Roland RD-500The S-Key fits in Keyboard PA4 AND PA4APlease have a look at the video for replacing Hammers.

1 pcs. Slider with 45mm Travel. Suitable for Kurzweil PC88The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Yamaha spezial IC for Power SupplyWe offer here a replica of the original Yamaha Power Stream IC. The replica is developed and distributed by Yamaha.Manufactured in modern SMD technology. With this your Disklavier will be functional again.Safety notice:Switching power supplies store high voltages of approx. 300 volts DC over a long period of time. This spare part is only for specialists with appropriate knowledge of electrical engineering.Technical Hint:This replica of the XK413A0 is a 1:1 replacement of the original Power Stream IC used by Yamaha in various switching regulator power supplies.Practical hint:The IC is firmly soldered onto a circuit board. Manual dexterity and experience in soldering are required for replacement.IC's are sensitive to static charge!  

1 piece Electrolytical Capacitor 6800uF/25V for Audio circuitsManufakturer: NichiconSeries: LKS - Snap InHere i offer spezial Capacitor from manufakturer Nichicon. The series LKS is developt spezial for use in audio circuits.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. OLED Display New forE-Mu Proteus 1E-Mu Proteus 2E-Mu Proteus 3To replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display.These different Display versions are available:BlueRed/OrangeYellowWhiteLifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.