1 pcs. Roland JP8000 OLED Display brandnew in blue this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Roland JP8000 OLED Display brandnew in green this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

Recapping set for  Roland  D-50 Sampler The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Roland Juno series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made of Capacitors, which have been specially developed for use in audio applications. For us is manufacturer Nichicon the manufacturer with a good quality at reasonable prices offers.Manufacturer: NichiconThe set consists of 88 electrolytical CapacitorsThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. Sanjo Battery with solder tail suitable for  Roland Juno 60Please check right polarity! Attention: Shipping for Europe only The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs. Varta Battery with solder tail suitable for  Roland Juno 60Please check right polarity! Attention: Shipping for Europe only The solder tail is about 0.5mm too wide to fit through the slot in the circuit board.The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs. tactile switch suitable for modelsRoland CR-80  (User Controls) The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

LCD Display for Roland Fantom XRThis part is no longer available from Roland

LCD Display forRoland Fantom X6Roland Fantom X7Roland Fantom X8

Knob for rotary potentiometers inRoland Fantom FARoland Fantom SRoland Fantom X6Roland Fantom X7Roland Fantom X8Roland Fantom XaSpecifications:Diameter top:       10.4 mmDiameter bottom: 17.8 mmHight:   17.2 mmShaft:   6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.

Dual Button for 12 x 5 mm (No Window)Roland U-20Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 12 x 5 mm. This part has two Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Dual Button for 17 x 5 mm (No Window)Roland FP-8Roland U-20Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has two Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button for 17 x 5 mm (No Window)Roland U-20Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

1 pcs. Knob for power switch inRoland Fantom XRSpecifications:Dimension: 18x18 mmHight:  10 mmTechnical description:Praktical tip:The knobs are just plugged on. No tools are needed.Price is for one Knob without switch

1 pcs. Fader knob suitable for:Roland U20

1 pcs. Dual Button for 17 x 5 mm with WindowRoland FP-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has two Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Pitch bend Assembly PB-H0204 for Roland Fantom series Synthesizer / Music Production WorkstationThis pitch bend unit is complete and ready to plug in wired for easy exchanging this unit. The unit fits every Roland Fantom Synthesizer. To do this work you have to open your instrument. To exchange the unit unplug two connectors and there will be some srews. That is all.Roland part number: PB-H0204 

Digital-Analog-Converter for audio application for Roland E-PianosPCM56P von Texas InstrumentsThis part is used from RolandRoland      part number:15209122   Resolution:                    16bitInterface:                      seriellConversion rate:            666kS/sNumber of DAC outputs: 2Number of channels:      1Case:                           DIP16warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a DIP 16 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 16 bit resolution. The conversion rate is 666kS / s. For operation, no external components, such as temperature compensation or similar is required.It is a symmetrical supply voltage of +- 5V to +- 12V needed.

1 pcs. PCM54HP - Digital-Analog-Converter for audio application von Burr BrownThis part is used inKorg M1Korg T1Korg T2Korg T3   Resolution:                    16bitInterface:                      parallelCase:                           DIP28warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a DIP 28 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 2.54 mm x 15.24 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is parallel and provides a 16 bit resolution. It is a symmetrical supply voltage of +- 5V to +- 12V needed.

1 pcs. BU4052B HEX Schmitt Trigger = MC14584Mechanical Description:The Multiplexer is housed in a DIP 14 package and is designed for  mounting on a circuit board. The Logic Circuit has 2 x 7 connecting pins with grid of 2.54 mm x 6.6 mm.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are

1 pcs. PCM1700U SOP28 Digital-Analog-Converter for audio application forResolution:                    18bitInterface:                      seriellNumber of DAC outputs: 2Number of channels:      1Case:                           SOP28Mechanical Description:The digital to analog converter is housed in a SOP28 package and is designed for SMD mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 1.27 mm x 7.4 mm.Technical Description:The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. For operation, no external components, such as temperature compensation or similar is required.It is a supply voltage of + 5V needed.

1 pcs Rotary Potentiometer vertikal 9 mm, 10kOhmSubstitute rotary potentiometer for Roland Fantom X6   -     Realtime ControlRoland Fantom X7   -     Realtime ControlRoland Fantom X8   -     Realtime ControlElectrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 9,7 x 12,5 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The Three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 11 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. Slider with 45mm Travel. Suitable for  Kurzweil SP88Roland MC909 The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Push Switch with solder Pins for PCB mounting suitable forRoland Juno 60 - Hold, Arpeggiotechnical Dates:Termination Solder PinSupplied without capPractical advice:Knowledge in soldering is required for switch replacement.

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.