Keyboards

1 pcs. Single Button for 17 x 5 mm with WindowRoland D-70Roland FP-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has one Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

1 pcs. LCD Display black brandnew forYamaha TG55this is  a plug in ready Display replacement for Yamaha TG55 . You will only need a screwdriver for this replacement.We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. LCD Display yellow brandnew forYamaha TG55this is  a plug in ready Display replacement for Yamaha TG55 .We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs Ceramic capacitor  68 pFSafety Ceramic Capacitor for use in Line Filters.For replacing craftsmanship and experience in soldering is required.""

1 pcs Ceramic capacitor 150 pFSafety Ceramic Capacitor for use in Line Filters.For replacing craftsmanship and experience in soldering is required.""

1 pcs Ceramic capacitor 10 pF - Y5PHigh Voltage Ceramic Capacitor for use in Line Filters.For replacing craftsmanship and experience in soldering is required. 

1 pcs Ceramic capacitor 150 pF - Y5PHigh Voltage Ceramic Capacitor for use in Line Filters.For replacing craftsmanship and experience in soldering is required.""

Electrolytical Capacitor 22uF/25V SMD The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

Electrolytical Capacitor 3,3uF/50V SMDManufakturer: Nichicon The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

1 pcs connection cable for your Roland PHA KeyboardThis Cable connects the Low, Mid and High Boards with the Mainborad of your Roland PHA Keyboard.Contacts:  16PPitch:       1,25 mmLength:     90 mm 

1 pcs. Technics Tapping Screw XTW3+10T Keyboardscrew These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device. To avoid misunderstandings, we use the screw designations from the manual. Dimensions: 3 x 12,5mm ScreLocation: PCB in KeyboardXTW3+10T in Service Manual.

1 pcs. Technics Tapping Screw XTN4+50AFZ Keyboardscrew These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Dimensions: 4 x 50 mmScrew XTN4+50AFZ in Service Manual.

1 pcs. Screw M2x10 VADimensions: M2 x 10 mm

Speaker plug 6 pin for Technics E-PianosThis plug is used in Technics E-Pianos for connecting the speaker sitting in the Stand fomr the Piano.

Contactrubber for Roland SK8 KeyboardRoland SK8 Keyboard is used inRoland JV-80Roland JV-90Roland JX-30Roland JX-35Roland JX-50Roland XP-30Roland XP-50Roland XP-60Attention: This blue contactubber do not fit in old SK8 Keyboards  

Parts for Roland SK9 KeyboardsHere you will find all parts like springs, felt, aftertouch and P.C.B.

Hammer for Roland Progressive Hammer Action Keyboard- PHA2 and PHA3Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107e

Roland Roland Jupiter-6 Fader Set comlete (Custom Built with dust cover for Synth-Parts)This Set contains:27 pcs. Fader 30mm    100KB These Potentiometers are brand new ALPS Potetntiometers Useful hint:Potentiometer are soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

1 pcs. new Blue LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth::The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask. 

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-SynthWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask. 

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character / yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals.Installation service for LCD Display:We are also happy to install the display for you. Please ask.  

1 pcs. Transformer Technics QTPG1M029AThis Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

1 pcs. Transformer Technics PR603This Transformer is usedd and in a good condition.suitable forTechnics PR603technical Hint:The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

AC-IN Circuit QJBG2164 for Technics, usedThese board is tested by us and fully working. We sell it with one year warranty.