Keyboards

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. used by:YamahaThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Complet replacement set potentiometer for Yamaha RM1xconsist of:8  pcs  rotary poti, vertikal, 12mm, Center click + TAP4  pcs  Encoder, 16mm1  pcs  Stereo Volume rotary pot, 14mmOperational Life for all pot's: 15.000 CyclesOperational Life for all Encoder: 50.000 CyclesMounting instruction Yamaha RM1x:in the RM1x Yamaha has installed a potentiometer without thread. The potentiometer I offer here can also be used in the RM1x. However, the housing holes must be drilled out by 1 to 2 mm and the axis must be shortened by 5 mm. The big advantage of this solution is that I think that threaded potentiometers are much more durable than unthreaded potentiometers. Undeniably, the axis is guided and supported by the thread much more stable.In the pictures you see a test installation I have made.The pot's  are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

tactile switch set suitable for modelsAkai MPC-3000Akai Part Number:  ES-410552 Delivery quantity: 57 pieces The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

Recapping set for Yamaha TX802Attention: 110V US VersionThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha TX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for complete recapping of Yamaha TX802 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. Battery with solder pin suitable for  RAttention: Shipping for Europe only Please check right polarity! The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

 1 pcs. PP Capacitor 33 nF Safety

Recapping set Power Supply for Korg i3 - MK1 - 1994 The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg i series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the switching power supply in the Korg i3. Warning PSU Recapping:Risk of electric shock: Switching power supplys store high voltage and high energy for a very long period of time. When working with these spare parts offered here, you are working directly in a 230VAC circuit. Observe polarity. Incorrect installation will cause explosion and fire. For experts only: Be aware of dangers of electric current

Recapping set Mainboard for Korg i3 - MK1 - 1994 The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg i series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard in the Korg i3. The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. PCB Connector 4 Pol, 2.5 mm PitchThis cable is ready assembled with a 14 pin board connector. The wires on the other side of the cable are stripped and tinned.technical hint:

Pitch bend Assembly suitable forTechnics KeyboardsWe offer here all replacement parts you will need to repair your Technics Pitch Bend Assembly. Our parts are used and in a good condition.

LCD Display with LED Backlight replacement including cable Kit forKawai K5000 We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

Recapping set for Roland  S-50 Sampler The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Roland Juno series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made of Capacitors, which have been specially developed for use in audio applications. For us is manufacturer Nichicon the manufacturer with a good quality at reasonable prices offers.Manufacturer: NichiconThe set consists of 88 electrolytical CapacitorsThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Yamaha Montage Scene Rotary PotentiometerYamaha Montage 6Yamaha Montage 7Yamaha Montage 8Yamaha YC73Yamaha YC88Electrical properties:The stereo nominal resistance has 5 Kilo-Ohm, the electric resistance gradient is liniear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in one row in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. NEC D71051GU-10 UART SSOP28

1 pcs. brand new LCD Display with blue LED backlight suitable forTechnics PR-602Technics PR-702Technics PR-902Technics PR-603Technics PR-703Technics PR-903Technics PR-1000The LCD displays built into the PR-603, PR-703 or PR-903 e-piano series by Technics are now aging. The original displays have a small fluorescent tube, a so-called CCFL backlight, as backlight. It is possible that only the backlight is defective or the whole display is defective. This can be that only single pixels in the display are missing or whole lines in the LCD no longer work. In extreme cases, entire areas of the screen can also fail. If only the CCFL backlight is defective you can use a new fluorescent tube. The whole thing requires very calm hands and patience because these backlight tubes have a diameter of only 2 mm. Therefore they are very sensitive and delicate. Here it is also necessary to solder. As an alternative we offer a replacement LCD equipped with modern LED backlight. If the display already has major defects or if you want to save yourself the soldering effort, this replacement display is a good choice. Scope of delivery:1 pc. new LCD display, ready wiredAssembly materialshort installation instructions Notes on installation:Please be aware that you are opening an electrical device that is supplied with 230 volts. This work should only be carried out by people who have the appropriate expertise.We have prepared everything so that the installation on your electric piano is as easy as possible. With the replacement display you will receive all the necessary parts for the installation. No soldering work is required. All cables are plugged in.  Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components. 

1 pcs. Battery with 3 solder pins suitable for  Kawai K5mimportant technical note:the original battery installed in the Kawai K5m has  2 soldering legs at the positive pole with a distance of 8 mm. The battery offered here has 2 soldering legs at the positive pole with a distance of 10 mm. It is possible to bend the two soldering legs forward so that they fit into the holes on the board.The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Attention: Shipping for Europe onlyInformation for handling old Battery's

1 pcs. Rotary potentiometer for LCD Contrast adjustment  The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. new Blue LCD Display with LED Backlight replacement forALESIS Andromeda A6We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character on Blue BackgroundAttention: The colour of the display shown may differ slightly from the original, e.g. due to your screen settings. Delivery scope:Display, prepared ready to plug inMounting partsBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beeping) is eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:This work should only be carried out by people who are technically, preferably electrotechnically, experienced.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. 1,44 MB Disc ALPS DF354H 

Replacement Keys for Korg Pa50Color: whitemechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

NEW Replacement Keys, weighted for Roland SK8 Synthesizer Keyboardused inRoland XP-30Roalnd XP-80This are new Key's without "Red Glue-Problem" 

Replacement keys and spare parts for Fatar TP/9 KeyboardActual Keys in stock are strong darkened. Please refer the Photo.Fatar TP/9 keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white. 

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: creme white (ivory)

Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.