Keyboards

Recapping set forYamaha  PSR-7000 PSUThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Safety note: This module has internal voltages of 300 volts. There is a very high risk of electric shock. Only suitable for electrical engineering specialists.Our recapping set is made up of Capacitors from Manufacturer Nichicon. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Power Supply UnitThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

Yamaha TX16W  Recapping Set 230 V completeThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.This set is for Europe - 230 VACSafety note: This module has internal voltages of 300 volts. There is a very high risk of electric shock. Only suitable for electrical engineering specialists.Our recapping set is made up of Capacitors from Manufacturer Nichicon. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the complete Rack unitThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

Recapping set Mainboard forYamaha CVP-85 CVP-87The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. POWER SWITCH ASSY CLP-170Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. SAJ410 - 7 Stage Frequency Divider ICOld stock - every single component has been checked by us for function. FeaturesClock frequency from 20Hz to 100KHz Package: QIL-14Pincompatible with SAJ110 Mechanical Description of SAJ410:The IC is housed in a QIL 14 package and is designed for trughhole mounting on a circuit board.ICs are sensitive to static charge! Handle with care.Semiconductors are excluded from exchange.  

1 pcs. Service Kit Kawai RN88 PWB Assy KKB-039(2)This service kit replaces the circuit boards and contact rubbers in the Kawai WR88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-039(2).The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA67Kawai CA78Kawai CA79Kawai CA97Kawai CA98Kawai CA99Kawai CS8Kawai CS11 

Fatar TP/8P Keyboard, Replacement keys semi weighted ivory Fatar TP/8P keyboard is a touch sensitive Pianokeyboard with semi weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The semi weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 11 mm. The distance from the front side of the key is 12,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color cream white. 

1 pcs. Kawai Volume Slider Knob for CA/CN Serie Black1/Ivory1Kawai CA95Kawai CN23 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Pianos 

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3A6Kurzweil PC3A7Kurzweil PC3A8We offer an absolutely equivalent display using modern LED technology for backlight.Note on the PC3X series from Kurzweil:The replacement display offered here is the appropriate replacement for Kurzweil displays that already use LED backlighting. This can be identified by a short 2-pin connector to the right of the display. Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement  Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast and brightness of the display can be adjusted as usual using the controls in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Roland Juno 106 Display Bezel blue newThis display bezel can replace the original display bezel on the Roland Juno-106. Due to the age of the Roland Juno-106 synthesiser, it is possible that the original bezel is scratched. It is also possible that the plastic has become brittle and must be replaced for this reason. Note on mounting the display bezel in the Roland Juno 106:It is best to use double-sided adhesive tape to stick the new display bezel in place. This adhesive tape can be purchased in suitable widths of e.g. 2 mm.

Key's 16N unweighted suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-e403Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

1 pcs. Yamaha Disklavier DRIVE B Circuit Board XL114D0  -- Discontinued -- Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

Replacement Keys for Technics SK25 KeyboardSK25 keyboard is used in Technics PR-603Technics PR-703 Color: pur whiteThe SK25 keyboard is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

Korg Prophecy Recapping Set for switching power suplly unitWarning: Switching power supplies store high amounts of energy for long periods of time. You are working on assemblies that operate at 230 V AC and approx. 300 V DC.You are carrying out this work at your own risk and under your own responsibility.The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set consists of capacitors from renowned manufacturers. Preferably from Nichicon, Würth or Vishay. The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

Yamaha 14Y replacement keys  mechanical construction:The keys for this keyboard are not available individually. Only one octave with 12 keys or the end octave with 13 keys is available. 

Recapping set for  Roland  D-50 Sampler The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Roland Juno series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made of Capacitors, which have been specially developed for use in audio applications. For us is manufacturer Nichicon the manufacturer with a good quality at reasonable prices offers.Manufacturer: NichiconThe set consists of 88 electrolytical CapacitorsThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. Power cabel 2m with 2P plug for Yamaha  InstrumentsVDE testedCable: H05VV-F2G0,75mm²Socket: C10Mains plug CEE 7/7 earth contactLength: 2 m  

1 pcs. Yamaha MKH contact PCB FSX76 D2I+ KeyboardThis PCB is for high part in Keyboard 

1 pcs. Yamaha MKH contact PCB FSX76 D2I+ KeyboardThis PCB is for lower Keyboard part. 

1 pcs. Yamaha MKC contact PCB FSX76 D2I+ KeyboardThis PCB is for center Keyboard part. 

1 pcs. Yamaha DX5 OLED Display NEW whiteReady-to-plug prepared OLED display for replacement in Yamaha DX5. The new OLED display is supplied by us with a new cable ready to plug in. Everything is screwed. No soldering required.Mechanical hints for the replacement of the OLED display in the Yamaha DX5:The mechanical effort required to remove the display from the instrument is relatively simple in this case. The cover of the synthesizer can be lifted up after loosening a few screws. Now the circuit board on which the display is mounted must be unscrewed. The display itself is screwed on and the cable is plugged in.Recommendation:Disconnect the circuitry that generated the backlight voltage for the old display. Simply cut off two components using small side cutters.Instructions are included with the display.Note on OLED technology:OLED - organic light-emitting diode. The advantage of OLED technology is that each pixel is illuminated. This makes the OLED display easy to read from all sides, even from extreme viewing angles. Furthermore, it is also very easy to read in sunlight.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Korg SV-1 Tube 12AX7  

1 pcs. Yamaha TYROS 5 LCL CIRCUIT BOARDSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

Replacement keys, weighted for Fatar TP/8+ KeyboardFatar TP/8+ keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points. The weighted keys have a length of 19,5 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 10,5 mm. The distance from the front side of the key is 13 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked. The keys are in color cream white.