Keyboard

Parts for Fatar KeyboardsThese parts fits forFatar TP/100LR Here you will find springs, felts, P.C.B., screws

Spare Parts for SK25 Keyboard Here you will find parts for SK25 Keyboard, like Felts, Springs and Contact Rubber

1 pcs. Replacement keys  for Fatar TP/9S Keyboard ,unweightedFatar TP/9S keyboard is a touch sensitive keyboard with unweighted keys. Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points. The unweighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 8,5 mm. The distance from the front side of the key is 11 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked. The keys are in color cream white.

Spare parts for Roland PA4A KeyboardDoes a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken. This part fits for all Roland PA4A Keyboards Roland PA4A Keyboard is used in Roland A90 and A90exRoland FP-1 and FP-8 and FP-9Roland HP-145 and HP-147Roland HP-236 and HP-237 and HP-245Roland HP-2800 and HP-2880Roland HP-330 and HP-335 Roland HP-3800Roland HP-530 and HP-535 and HP-550 and HP-555Roland HP-5700Roland HP-730Roland RD600Roland XV-88 The S-Key fits in Keyboard PA4 AND PA4A. You can find it here: TTROPA4-KBLPlease have a look at the video for replacing Hammers.

1 pcs. Korg microKorg keyboard completemicroKorg

1 pcs. Korg microKorg keyboard completemicroKorg XL

1 pcs. Contactrubber GH 2M suitable forYamaha CP1

1 pcs. Contactrubber 16N 1M suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-e203These Contactrubber was buildt in two different colors. Function is in both cases the same.

1 pc. Contact rubber for Roland PA4 keyboard -- discontinued  --Features:    Height of contacts: 9 mm    width of the strip:    32 mm    Length of the strip: 165 mm    Number of contacts per strip: 12 contactsRoland spare part number: 22185247This contactrubber fits in Roland PA4 and also Roland PA4A Keyboard.One contact strip consists of 12 contacts and thus covers one octave. For a complete replacement of the contact strips in a keyboard with 88 keys, 7 contact strips + 4 contacts are needed. The remaining 4 contacts can easily be separated from a contact strip with 12 contacts. For this purpose, a notch is provided in the contact strip after every 4 contacts.

Replacement Keys for Yamaha NL4 AI KeyboardThese Keys fits for all Yamaha NL4 AI keyboards.Yamaha NL4 AI keyboard is used in:Yamaha Clavinova CLP-675Yamaha Clavinova CLP-775Yamaha Clavinova CLP-785Yamaha Clavinova CLP-795GP The Yamaha NL4 keyboard is a velocity-sensitive keyboard.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

1 pcs. Contact rubber for Kawai WK88 Keyboard discontinuedA contact rubber consists of 12 contacts and covers an octave.Contact high:  11 mmStrip bright:   25 mmStrip length:  164  mmNumber of contacts: 12These contactrubber for e-pianos has been used in:Kawai CA5Kawai CA7Kawai CA9Kawai MP8Kawai MP9500A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

Replacement Keys for Yamaha NL4SW KeyboardThese Keys fits for all Yamaha NL4SW keyboards.Yamaha NL4SW keyboard is used in:Yamaha CLP-745Note on the keys supplied:The keys are delivered without the black rubber that is mounted at the bottom of the key. The black rubber is taken from the old key. The rubber is clicked in and can be easily replaced. The Yamaha NL4SW keyboard is a velocity-sensitive keyboard. The keys have a wooden core that is covered with plastic.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

1 pcs. Piano felt as alternative to Yamaha sliptapeOur alternative for the sliptape used by Yamaha for wooden keys.Piano felt, an old and proven product from the piano industry. This piano felt is used by every piano builder exactly at the places where mechanical load capacity is important. There where a lever movement is converted into a rotary movement and mechanical parts should slide over each other as noiselessly as possible.In the Yamaha digital pianos in which wooden keys are used is exactly such a mechanical load given ngeb ndie from Yamaha with a so-called Sliptape is padded. This piano felt here is best suited to replace the Yamaha sliptape.What else you need:1 cutter knifePonal expressAlcohol for cleaningPolishing paste

Contact PCB for Yamaha 16NW keyboard PCB high

1 pcs Yamaha contactrubber AELC 12 contactsContactrubber for one actave with 12 contacts.This rubber was used in YPP-50

1 pcs. Service Kit Roland PHA2 PWB AssemblyThis service kit replaces the circuit boards and contact rubbers in the Roland PHA2 keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of three boards, fully equipped with new contact rubbers.It is only possible to exchange this sentence completely. From Roland this is the only suitable replacement.

1 pcs. Service Kit Kawai RJ88B PWB Assy KKB-034(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RJ88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai ES110Kawai ES120

1 pcs . Fatar TP/9S+ fully weighted replacement keysThis keys are used innewer Moog modellsNonlinearlabsColour differences may occur. It is possible that keys with different colour shades were used in the different instruments. Fatar TP/9S+ keyboard is a touch sensitive keyboard with weighted keys.Keys are mounted on a support frame with core of steel sheet. At these core all attachments were made of plastic in an injected machine.contact detection is done via 12 pin contact rubber strip with two graphite points.The weighted keys have a length of 16 cm and a width of 2.24 cm. The thickness of the keys is 1,2 cm. Key guidance and upper stop point are implemented in this keyboard through an eye at the key bottom. The contactor, which presses the contact rubber strip is  worked out by an increase of 9 mm. The distance from the front side of the key is 10,5 cm. At the end of the key is a semi-circular passage aperture into which a spring is hooked.The keys are in color white. 

1 pcs. Yamaha FSX Stopper U 76This FSX keyboard is used in these modells and others:Yamaha Motif XS7 

1 pcs. Yamaha contact PCB for Yamaha NL4 3M KeyboardThis keyboard is used inYamaha CLP-675Yamaha CLP-685The contact board for a complete keyboard with 88 keys is divided into three parts. There is a LOW, MID and HIGH PCB board. 

1 pcs. Yamaha GHD CL A88 Keyboard complete This keyboard is used in these modells:Yamaha CLP-150Yamaha CLP-320Yamaha CP-40Yamaha CP-50Yamaha CP-300Color: cremewhite--- shipping only in germany, sorry  ----- 

1 pcs. Yamaha GH3 Stopper U88 with AftertouchThis GH3 keyboard is used in these modells and others:Yamaha Montage 8This felt is special for GH3 Keyboards with Aftertouch 

1 pcs. Yamaha NL4 FFC Cable for PCBThis cable fits in these keyboardsYamaha NL4