Yamaha

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo witch switch, printed circuit Jalco YKB21-5078 with 9 Solder Lugsthis Phone Jack corresponds to these parts:YKB21-5078HLJ-2305HTJ-064-16DThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Yamaha Pedalcable No1This cable with plug is used by Yamaha for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 6 Pol Mini Din Plug. 5 wires are assigned on both sides.This cable is used inYamaha CLP-440

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

1 pcs. Yamaha Pedalcable No3This cable with plug is used by Yamaha for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 6 Pol Mini Din Plug. All 6 wires are assigned on both sides.This cable is used in:Yamaha CLP-745Yamaha CLP-810SYamaha CLP-840Yamaha CLP-860Yamaha CLP-990Old Manufacturer Number: V0044700

1 pcs. tactile switch suitable for modelsYamaha W5Yamaha W7 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

 1 pcs. PP Capacitor 22 nF Safety

1 pcs. Yamaha Reface MIDI cable forYamaha Reface CPYamaha Reface CSYamaha Reface DXYamaha Reface YCthis is a special MIDI cable for Yamaha Reface CP Synthesizer. Because of small housing Yamaha used here a MINI DIN plug.Adapter cable: The cable is provided with a MINI DIN plug on the side to the synthesizer from which the two usual 5-pin DIN sockets are then led out. 

1 pcs. Yamaha Pedal PotentiometerThis is a replacement Poterntiomter for Pedal from E-Piano if there is a Volume Pedal installed.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Pedal.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

Recapping set Power Supply for Yamaha DX7,DX9The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the power supply in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90330 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. Contactrubber 16M CT2M suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-270Yamaha PSR-340Yamaha PSR-640Yamaha PSR-740Yamaha PSR-S700Yamaha PSR-S710Yamaha PSR-S750Yamaha PSR-S770Yamaha PSR-S900Yamaha PSR-S910Yamaha PSR-S950Yamaha PSR-S970Yamaha PSR-1500Yamaha PSR-2000Yamaha PSR-3000These Contactrubber was buildt in two different colors. Function is in both cases the same. 

1 pcs. Yamaha Headphone HPE170 EAR PAD ASSYThe ear cups have a narrower opening for attaching them to the headphones. The replacement procedure requires a bit of force.The Yamaha HPE-170 headphones were launched in 1993. We offer here one new ear cup, suitable for the Yamaha headphones HPE170. The ear pad is a original Yamaha spare part. 

Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in  Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. new Contactrubber for Yamaha 16NW KeyboardThis keyboard is used in these modells:Yamaha MOX6Yamaha Tyros 1Color of these Contactrubber may be different.

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition  

1 pcs. slide potentiometer with 30mm travel. Suitable Slider forData Entry für  Yamaha DX7 Yamaha DX9 Yamaha DX11Yamaha DX27 Yamaha DX100 This volume control with the labelling EWANA0C10B14 is no longer available from the manufacturer Panasonic, because it is no longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.  Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

Wheighted Key's suitable for Yamaha FSX KeyboardThis keyboard is used in these modells:Yamaha Motif XS6Yamaha Motif XS7Yamaha Tyros 2Yamaha Tyros 3Yamaha Tyros 4Color: whiteThis key is new

Recapping set Mainboard for Yamaha DX7The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.If no longer available from Nichicon we use Würth or Rubacon Capacitors.This Recapping Set contains all necessary Capacitors for the Mainboard in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90370 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. Phone Jack 1/4 inch - 6.3 mm, Mono witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5076HLJ-2305-01-3030These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Replacement Keys and spare parts for Yamaha AE KeyboardThis part fits for all Yamaha AE Keyboards.Yamaha AE keyboard is used inKorg C-15, C-25, C-30, C-40, C-400, C4000, C-50, C-5500,C6000, C6000MKorg SG-ProXYamaha CLP-122, CLP-550, CLP560Yamaha CVP-20, CVP-50, CVP-55, CVP65, CVP85, CVP87Yamaha AE Keyboard is a very old and one of the first Hammer Action Keyboards. A note on the contact rubbers: The contact rubber for the 88'er keyboard is available in the colors pink and green. The contact rubber in pink is missing 2 holes in the rubber that serve as a mechanical guide.Contactrubber in green is out of production.The interruptions in the contact rubber are not symmetrical. 

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha DGX-660Yamaha P-45technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. OLED Display blue New forYamaha DX7Yamaha DX9This Display replacement is a really easy swapping. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha Spezial Keyboard grease, white 50gMOLYKOTE G-1006YOriginal Yamaha plastic grease for NL2 Keyboards.Color is white and will be delivered in a 50 gramm portion.This grease can also be used on Yamaha GHD / GH3 keyboards at key guides.

tactile switch suitable for Keypad in these Groovebox'sRoland MC-303Roland MC-307Roland MC-505Roland MC-909   TAPYamaha RS7000Part Number:Roland 125590Yamaha V5914900The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton