1 pcs. Contact rubber forKorg Pa500Korg X50This are brand new contact rubbers.A contact rubber consists of 12 or 13 contacts and covers an octave. A rubber contact strip consists of 12 or 13 contacts and covers an octave. For complete replacement of the rubber contact strips in a keyboard with 61 keys you will need 4 contact rubber with 12 contacts and 1 contact rubber with 13 contacts.

1 pcs. Korg microKorg keyboard completemicroKorg

1 pcs. Korg microKorg keyboard completemicroKorg XL

1 pcs. 6 pin FFC socket with 2.54 mm pitch6 pinPitch: 2.54 mmLength:  17 mmdeepth:    4,50 mmhight:       6,70 mmThese socket is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forKorg i2Korg i3We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play Display. No soldering is requiered.Color: White Character  /  Black BackgroundDelivery scope of Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation LCD Display:The instrument must be disassembled almost completely to reach the display.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. LCD Display with LED Backlight replacement including cable Kit forKorg i2Korg i3We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  yellow BackgroundDelivery scope of LCD Display:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg i2,i3:The instrument must be disassembled almost completely to reach the display.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKorg i2Korg i3We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument. Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg i2 or Korg i3:The instrument must be disassembled almost completely to reach the display.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.We are proud to offer the thinnest displays available on the market. 

1 pcs. Yellow LCD Display with LED Backlight replacement including cable Kit forKorg 01R/W We offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  Yellow BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01R/W:The instrument must be disassembled almost completely to reach the display.The rack version of the Korg 01/RW synthesizer has much less mechanical effort than the keyboard versions.For the new display to work, one SMD resistor on the mainboard of the Korg 01/RW must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/RW have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people 

1 pcs. Korg X5D OLED Display New forReady to plug in OLED Display for replacement in Korg X5D. No soldering is required.Mechanical modification is required.The original LCD display in the Korg X5D is screwed onto fixed mounting bolts, whereby the distance to the front panel is fixed. Since the OLED display is much flatter than the original LCD display, there is a tunnel effect with the OLED. It is possible to shorten the mounting bolts in the Korg X5D. This work requires skill and good fine motor skills.For the actual assembly of the new OLED display in the Korg X5D only a screwdriver is required.Scope of delivery of the OLED Display Set:OLED Display ready wiredPlease choose you favorit color. Lifetime of OLED Display:The lifetime is specified by the manufacturer with 40,000 to 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Korg X2 Volume Slide PotentiometerKorg X2Korg X3Korg X5Korg X5DOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Korg i2 Volume Slide PotentiometerKorg i2Korg i3Korg i40Korg i50OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Nch Power MOSFET FQP2N90 - Replacement for 2SK1199 Housing:  TO220VDss:      900VId:          2.2APd:          85WTechnical hint:suitable replacement for PSU in Korg T1,T2,T3 

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg Instruments Technical description :The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Korg M1 recapping set complete unitThis recapping set contains all electrolytic capacitors for a complete recapping of the Korg M1R rack module synthesiser. Also included are all safety-relevant ceramic and foil capacitors of the power supply.Safety note:You are working on components that are in direct contact with the mains voltage of 230 volts AC. This work is only suitable for specialists with appropriate electrical knowledge. The Capacitors are firmly soldered to a circuit board. For replacing the capacitors craftsmanship and experience in soldering is required. 

1 pcs. Korg M1R OLED Display brandnew in yellow this is  a plug in ready OLED Display replacement for Korg M1R Rack Synthsizer. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.To install this OLED replacement display in the Korg M1R, first remove the housing cover of the synthesiser. The front panel is then removed. The display is now accessible and can be unscrewed. When mounting the new OLED display in the Korg M1, please use the spacer sleeves supplied.Not compatible with Korg M1 Keyboard version. This Display is a separate item.The color of the shown display, may differ from the original.Installation service for Korg M1R:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs Screw M6 x 18 mm black PH for Rack Mounting  

1 pcs Screw M6 x 20 mm PZ for Rack Mounting  

1 pcs. Korg M1 OLED Display brandnew in white this is  a plug in ready OLED Display replacement for Korg M1 Keyboard Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Korg M1. The OLED display itself is supplied pre-wired. No soldering is requiredNot compatible with Korg M1R Rack Synthesizer. This Display is a separate item.Mounting instructions for Korg M1 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly: The display in the Korg M1 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Korg M1 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Korg M1 Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Korg SV1 Single-pole push switch in the switch design - OFF with solder terminals or AMP Termination Solder LugMounting  with threadVDE-tested Mechanical Description:The housing of the switch is made of plastic. The switch is provided for a screw in a housing and has one thread for M12 x 0.75.  The switch itself has a width of 14 mm, a length of 29.5 mm and a depth of 15 mm. The protruding switching element has a length of 17,5 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 6.3 mm. Knowledge in soldering is required for switch replacement.  

1 pcs. Mainboard repair for Korg SP-250 E-PianosThe circuit board is repaired and tested by us and is fully functional after the repair. We offer a one-year warranty on this repair.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard. 

1 set Korg Wavestation sidepanels L+R PadoukAdd elegance of burgundy wood to black metal of your black keyboard housing!Custom Side Panels for Korg Wavestation – Padouk Wood (Burgundy Finish)are produced by Kerbstück from Wermelskirchen in Bergsichen Land.Upgrade your Korg keyboard with this elegant pair of handcrafted side panels, made from genuine Padouk wood. Known for its rich reddish-burgundy hue and striking grain patterns, Padouk adds a bold, professional touch to your instrument.The surface is finely sanded and sealed with open-pored oil.Perfect for musicians seeking a blend of functionality and visual appeal, these panels offer both protection and an artisan-quality upgrade to your instrument's aesthetics.Customised engravings for these side panels and a version for AirTAG are available on request directly from www.Kerbstueck.de.Scope of delivery:One side panel left and one side panel right.The original fastening screws can be reused. Sample pictures of Korg Wavestation side panels:Every single set of these side panels for Korg Wavestation is unique. For this reason, the the photos of the product here are only sample photos. 

Spare Parts for RH3 KeyboardHere you will find parts for RH-3 Keyboard, like Felts, Springs and Contact Rubber

1 pcs Korg Grandstage cap for Power Switch Technical Description: Practical tip:The cap is placed on the pin of the power switch. 

1 pcs. Korg PA5x LCD DisplayOriginal Display unti from Korg