Keyboards

1 pcs. Encoder suitable for modelsYamaha W5Yamaha W7Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Black LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards  the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.   

1 pcs. SLIDE POT. BH10K OHM DX21Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. CIRCUIT BOARD PNR TYROS2Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. SLIDE POT. B10.0K SY85Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs E-mu E64 mounting set for Hard DiscMounting kit to mechanically detach the hard drive from the enclosure.Attention: Only for old 3U rack devices. The new devices have different mounting points in the enclosure.With many of the E-Mu rack devices, the noise generated by the hard drive is a major problem. Particularly in quiet studio environments, the sound of the hard disc can be very disturbing.One noise will always remain. Whenever something moves, there is also a noise. The main advantage of our mounting set is that the hard drive and the hard drive vibrations are decoupled from the housing. 

1 pcs. Yamaha Coil assy long cable MX100IIXGThis coil is used in various Yamaha Disklaviers and also Disk Grand Pianos. In the original assembly from the factory, coils with different colour markings and also with different cable lengths are used. Only the coil shown here is available as a spare part.Security Advice: Please be aware thath these coils are using 110V DC or 120V DC. 

1 pcs. Music stand for Technics Keyboard usedTechnics KN1000This music stand is placed at the rear sideMounting: reare sideMounting design: plugMaterial: Metal, blackz anodizedwide range Note pad: 45 cmwide range top:         40 cmhigh:                         20 cmDiameter hole :             5 mm

1 pcs. Yamaha SY35 OLED Display NEW white, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY22 OLED Display NEW white, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY22 OLED Display NEW green, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY22 OLED Display NEW red, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY22 OLED Display NEW yellow, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY22 OLED Display NEW blue, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY35 OLED Display NEW green, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY35 OLED Display NEW red, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Yamaha SY35 OLED Display NEW blue, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

Recapping set complete for Yamaha SY35The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha SY series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.If no longer available from Nichcion, we use Würth or Rubycon Capacitors.This Recapping Set contains all necessary Capacitors for the complete Yamaha SY35 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. IC HD6475328CP10 SY55/TG55Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Service Kit Kawai WK88 PWB Assy KKB-008This service kit replaces the circuit boards and contact rubbers in the Kawai WK88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-008.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA13Kawai CA63Kawai PW9Kawai PW1000

1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.