connectors and cable

1 pcs. FFC cable for Yamaha CVP-303 500 mm lengthLength = 500 mmPitch= 1,0 mmBoth sides have the same connectorThis cable is used to connect LCD Display with Mainboard inYamaha CVP-303The LCD display in the Yamaha Clavinova has vertical stripes in the display?Do you have vertical stripes in the LCD display of your electric piano? These are lines that run from top to bottom through the display and do not belong in the picture.An exchange of this FFC cable can achieve an improvement. In the best case, the vertical stripes are then completely gone. 

1 pcs. Yamaha RCA stereo jack YKC21-3120 These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs Yamaha CP4,CP40 GHD connection cable 7 pol for KeyboardThis Cable connects keysboard an Mainboard in your Instrument. Please note: This cable will most likely be available in many different lengths!!!!  

Socket 5 pin for printed circuits These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Housing 5 pin for TechnicsThis socket is used in some Technics e-Pianos for Pedal Cable.Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Mini Din plug male 8 pin for printed circuitthis mini din plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN plugs. It can be a 4 pole or a 8 pole version.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

DIN socket female 8 pin for printed circuit These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Mini Din socket female 4 pin for printed circuitthis mini din Plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN sockets. Sometimes it is a 4 pole or in other cases it is a 8 pole socket.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

MIDI DIN socket female 5 pin for printed circuitused in: Korg SP250 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5066 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

Cable with plugs QEXG-VH06015 for Technics Speaker, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111This cable is used inside the E-Piano to connect Speaker in E-Piano Stand.

1 pcs. FFC cable 16 pin 1,25 mm pitchKeyboard connection cable This cable connects the PCBs in your Roland Keyboard

1 pcs. FFC cable 16 pin 1,25 mm pitchKeyboard connection cableLength = 600 mmPitch= 1,25 mmBoth sides have the same connector  

1 pcs. FFC cabel 22 pin 1,25 mm pitchKeyboard connection cableLength = 600 mmBoth sides have the same connector  

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Phone Jack 1/4 inch, Stereo for printed circuitSpecification:StereoThread: UNF 7/16 InchHousing: PlasticThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Speaker plug 6 pin for Technics E-PianosThis plug is used in Technics E-Pianos for connecting the speaker sitting in the Stand fomr the Piano.

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. used by:YamahaThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Socket 5 pin for TechnicsThis socket is used in some Technics e-Pianos for Pedal Cable.Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

1 pcs. Socket 15 pin for TechnicsThis socket is used in some Technics e-Pianos for Pedal Cable.Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

1 pcs. double MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5054 rotated 180 degreeused by: KorgRolandYamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.