connectors and cable

1 pcs. Technics Pedalcable No1Pedal cable (2 meter) with plug used by Technics E-Piano models.Technics PC15Technics PC25Technics PR554Technics PR603Technics PR663Technics PR703Technics PR903This cable is also used on other Technics E-Piano modell but the pin assignment differs.The cable fits variants with 3 pedals and has a 4 pol mini Din plug.Handcrafted faithfully reproduction made by Synth-Parts

FFC cable set for Roland PHA KeyboardsKeyboard connection cableThis set conists of two cables which connect the Keyboard with the Mainboard1 x 16P1 x 22PLength = 600 mmBoth sides have the same connector  

18 pin FFC socket with 2.54 mm pitch18 pinPitch: 2.54 mmLength: 51,18 mmdeepth:  4,50 mmhight:      6,70 mmThese socket is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

Phone Jack 1/4 inch- 6.3 mm, Mono with Switch, for printed circuit used by  Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs.  18 pin FFC cable with 2.54 mm pitch and 100 mm length18 pinPitch: 2.54 mmLength: 100 mmcontactlength: 7 mmcontacts same sideThese cable is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

Phone Jack 1/4 inch- 6.3 mm, Stereo with two switch, for printed circuit used inThese Phone Jack is in a simple version used inRoland Juno 6Roland Juno 60Technical descriptionThe offered phone jack for PCB mounting is a stereo jack two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Excessive legs can be cut off until the right configuration is achieved.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5050 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. FFC cable for Yamaha CVP-209 500 mm length Length = 500 mmPitch= 0,5 mmBoth sides have the same connectorThis cable is used to connect LCD Display with Mainboard inYamaha CVP-207Yamaha CVP-209Yamaha CVP-900The LCD display in the Yamaha Clavinova has vertical stripes in the display?Do you have vertical stripes in the LCD display of your electric piano? These are lines that run from top to bottom through the display and do not belong in the picture.An exchange of this FFC cable can achieve an improvement. In the best case, the vertical stripes are then completely gone. 

1 pcs Yamaha FSX Keyboard FFC cable 23 Pol 1,25Keyboard connection cableLength = 130 mmBoth sides have the same connector  

1 pcs. Cable straight thru 12,7 x 11,7 mmThis Cable straight thru is used by 2 pol power cords.Dimensions of mounting hole: 12,7 x 11,7 mm

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo with two switch, for printed circuitThis part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Yamaha DX7Technics SX -PX20Technical descriptionThe offered phone jack for PCB mounting is a stereo jack two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

Phone Jack 1/4- 6.3 mm, stereo witch Switch, for printed circuit used by  Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Phone Jack 1/4- 6.3 mm, Mono, for printed circuit used by  Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Kawai Pedalcable No2

1 pcs.  FFC cable 26 pin 1.25 pitch 420 mm Length = 420 mmsame side contacts.

1 pcs. FFC cable for Yamaha Clavinova CVP-309 800 mm length Length = 800 mmPitch= 0,5 mmBoth sides have the same connectorThis cable is used to connect LCD Display with Mainboard inYamaha CVP-307Yamaha CVP-309The LCD display in the Yamaha Clavinova CVP-309 has vertical stripes in the display?Do you have vertical stripes in the LCD display of your electric piano? These are lines that run from top to bottom through the display and do not belong in the picture.An exchange of this FFC cable can achieve an improvement. In the best case, the vertical stripes are then completely gone.

1 pcs. 26 pin FFC socket with 1.25 mm pitch right angel26 pintop contact sidePitch: 1.25 mmThis FFC Socket is used in Roland JD-800. This is located on small PCB under Keyboard

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit Mono without switch These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Yamaha USB Socket Typ B PCBJalco used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. Yamaha USB Socket Typ A PCBJalco YKF45-0021used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. triple MIDI DIN socket female 5 pin for printed circuit - Roland MIDI3-NSJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. The original MIDI jack in your instrument will certainly look somewhat different. Today's possible replacement of this 3-way MIDI jack looks slightly different, but is identical in function.  used by:Roland These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Yamaha Genos  Systemcable to SubwooferThis cable connects your Genos with Subwoofer GNS MS01 

1 piece Kawai Pedalcable No3Pedal cable with plug for various Kawai electric piano models. The cable fits for GFP3 pedal.The cable has a 6 pin Din connector on one side and a 7 pin flat connector on the other side.

Mini Din plug male 4 pin for printed circuitthis mini din plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN plugs. It can be a 4 pole or a 8 pole version.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.