Products

1 pcs. Loctite 3090 Two-component super glue 10gGap-filling instant adhesive from Henkel.Working time: 90 to 180 secondsGap filling up to 5 mmScope of delivery:Cartridge with adhesive 10g6 interchangeable nozzles.Always ensure adequate ventilation when using adhesives. 

1 piece Fuse 5x20 mm 250V T1A time-lag  

1 pcs. Quasimidi button cap clear Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

1 pcs. Korg X2 Volume Slide PotentiometerKorg X2Korg X3Korg X5Korg X5DOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Korg C15 Volume Slide PotentiometerKorg C15Korg C25Korg C35Korg C45OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Korg i2 Volume Slide PotentiometerKorg i2Korg i3Korg i40Korg i50OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

Contact PCB for Yamaha 16NW keyboard PCB high

1 pcs. Replacement rotary potentiometer suitable forQuasimidiElectrical properties:The nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 12 mm, the total length without pins is 25 mm. In this total length the casing is 9 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is slotted and Knurled on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in one row in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 12,2 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. Phone Jack 1/4 inch, Mono for printed circuit 2 switchSpecification:MonoThread: UNF 7/16 InchHousing: PlasticThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. ipcas Disc-Manager Software for WindowsFloppy2USB disk management software for Windows.---- Without support --The manufacturer IPACS does not offer this tool anymore. 

1 pcs Kawai Headphone Board KEP-642THis PCB is used inKawai ES110Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Nch Power MOSFET FQP2N90 - Replacement for 2SK1199 Housing:  TO220VDss:      900VId:          2.2APd:          85WTechnical hint:suitable replacement for PSU in Korg T1,T2,T3 

1 pcs Yamaha contactrubber AELC 12 contactsContactrubber for one actave with 12 contacts.This rubber was used in YPP-50

1 piece Electrolytical Capacitor 100uF/200V for Switching Power SupplyManufakturer: Nichicon Here i offer spezial Capacitor from manufakturer Nichicon.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 piece Elko 2,200uF/25V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer a special Capacitor from manufakturer Nichicon. The KA series  is developed  especially for use in audio equipment.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. Yamaha N1 MVR Volume Board new

1 pcs. Mainboard for Roland KR-370 E-PianoThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

1 pcs. Service Kit Roland PHA2 PWB AssemblyThis service kit replaces the circuit boards and contact rubbers in the Roland PHA2 keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of three boards, fully equipped with new contact rubbers.It is only possible to exchange this sentence completely. From Roland this is the only suitable replacement.

1 pcs. Floppy2USB Emulator suitable for Yamaha 9000Pro We deliver this Floppy2USB drive with a suitable adapter cable. The installation is easy to accomplish.Much more complex is the transfer of the floppy disks to the USB stick. This requires an old PC that still has a floppy drive and a USB post. Here there is a software that supports copying.

1 pcs. OLED Display brandnew in yellow forRoland D-550this is  a plug in ready Display replacement for Roland D-550. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation:We deliver this OLED dislpay for the Roland D-550 synthesizer ready for installation. All necessary cables are already soldered on. You will only need a screwdriver for the installation.- Recommendation: Take out of function the circuit part that generated the backlight voltage for the old display. It is sufficient to cut off two components with a small side cutter.- Instructions are enclosed with the display.The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. OLED Display New forAlesis HR-16mechanical work is required on Alesis HR-16:The display is mounted on plastic bolts that are firmly connected to the housing. These plastic bolts must be shortened. The height of the OLED display is much lower than the height of the original LCD display. Without adjustment of the plastic bolts, a tunnel effect occurs because the new OLED display is much too deep in the housing.The screws from the original display can be reused.No soldering is required. The required plug is already soldered on and the cable is only plugged on.The color of the display shown may differ slightly from the original.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000  operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. OLED Display brandnew in yellow forRoland JD-800this is  a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Service Kit Kawai RJ88B PWB Assy KKB-034(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RJ88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai ES110Kawai ES120

1 pcs. Roland JD800 Encoder Board newThis Encoder PCB is suitable forRoland JD800Mechanical Description of Encoder Board:we deliver a brand new Encoder and a PCB ready mounted, herer you can just plug in the original cable. The cable is just pluged in and has to be taken over from original Encoder Board.This new Encoder has housing from Metall and a plastik axis.Practical advice for Mounting JD800 Encoder PCB:The circuit board must be machined:The new encoder has a larger thread than the original encoder in the JD-800. Furthermore, there is a pin on the encoder to prevent mechanical rotation of the component. The mounting hole for this pin must be re-drilled. The exact drilling plan can be seen in the pictures.The enlargement from 7 mm to 9 mm can be done by hand with a standard metal drill. This is gentler than working with a machine.