Technics
1 pcs tooth rack for keyboard cover guide right for Technics E-Pianos PR170-PR370 This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic
1 pcs tooth rack for keyboard cover guide left for Technics E-Pianos PR170-PR370 This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic
AC-IN socket housing for Technics E-PianosThe speaker output is closed.This housing is made of plastic
1 pcs. MIDI socket housing QGKG0076 for Technics E-PianosThis housing is made of plastic
1 pcs. holder QMRG7029A for Technics E-PianosThis part is made of plastic
1 pcs. holder QMRG7028for Technics E-PianosThis part is made of plastic
1 pcs. MIDI socket housing QGKG0076A for Technics E-PianosFor MIDI Board with tuneThis housing is made of plastic
1 pcs. Cover Technics PX111Under this Cover htere are User control buttons and switch.Used item, maybe there are some scratches !!!
1 pcs. Cover Technics PX103Under this Cover htere are User control buttons and switch.Used item, maybe there are some scratches !!!
MMBT3904Transistor MMBT3904 SMD replacement for 2SD601Aaund 2SB709A
1 pcs. M5238AL Dual Operational Amplifier with low noise for audio applicationThis OP-Amplifier is downgrade compatible with:M5218ALMechanical Description:The Amplifier is housed in a SIP 8 package and is designed for trughhole mounting on a circuit board. The Amp has 1 x 8 connecting pins with grid of 2.54 mm.
1 pcs. PCM69AU Digital-Analog-Converter for audio application forResolution:              18bitInterface:                   seriellNumber of DAC outputs: 2Number of channels:     1Case:                         SOIC 20warm-up time:            1 minMechanical Description:The digital to analog converter is housed in a SOIC 20 package and is designed for SMD mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 10 connecting pins with grid of 1.27 mm x 7.4 mm.Technical Description:The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. For operation, no external components, such as temperature compensation or similar is required.It is a supply voltage of + 5V needed.
1 pcs. PCM1728E SSOP28Digital-Analog-Converter for audio application forResolution:              24bitInterface:                   seriellNumber of DAC outputs: 2Number of channels:     1Case:                         SOOP28Mechanical Description:The digital to analog converter is housed in a SOOP258 package and is designed for SMD mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 0.63 mm x 3.8 mm.Technical Description:The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. For operation, no external components, such as temperature compensation or similar is required.It is a supply voltage of + 5V needed.
4,72 inch midrange speaker, Technics EAS-12P458A3 or EAS-12P458JB3Asuitable forTechnics E-PianosTechnics Keyboards
5,51 inch lowrange speaker, Technics EAS14PL93A or EAS14PL11A3suitable forTechnics E-PianosTechnics Keyboards
2,36 inch highrange speaker, Technics EAS-65PH31A3 oder EAS-65PH31D3suitable forTechnics E-PianosTechnics Keyboards
1 pcs. 8 inch lowrange speaker, Technics EAS20PM223 or EAS20PM224suitable forTechnics E-PianosTechnics Organs
1 pcs. 12 inch lowrange speaker, Technics EAS-30PL109 or EAS-30PL122suitable forTechnics E-PianosTechnics Organs
1 pcs. 12 inch lowrange speaker,new Replacement for Technics EAS-30PL109 or EAS-30PL122suitable forTechnics OrgansPractical tip:The speaker is mechanically fixed wirh nuts or screws. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.
1 pcs. 8 inch lowrange speaker, neuReplacement forTechnics EAS20PM223 or EAS20PM224suitable forTechnics E-PianosTechnics OrgansPractical tip:The speaker is mechanically fixed wirh nuts or screws. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.
Socket 5 pin for printed circuits These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
Technics as a brand of Panasonic Corporation
In 1918, the Japanese Konosuke Matsushita founded the company Matsushita, based in Osaka, Japan. This is the cornerstone of today's Panasonic Corporation, a major corporation known worldwide. Just like the name Panasonic, the name Technics is just a brand name. The Technics brand was introduced by Matsushita Group in 1965. Technics stands for hi-fi equipment and musical instrument at a very high technical and tonal level. In 2008, the Matsushita Group is renamed to Panasonic Corporation. The brand name Panasonic thus becomes the namesake of the group.
Musical instruments from Technics
When the brand Technics was founded in 1965, two product lines were established. On the one hand, hi-fi devices such as amplifiers and turntables. The second product line produces electronic keyboard instruments. The Technics offered organs and electric pianos are at a high level. The processing of the instruments is very good and the sound quality is convincing. In 2010, Panasonic decided to discontinue the production of hi-fi equipment as well as the production of Technics keyboard instruments.
Technics organs
The development history of electronic keyboard instruments is above all a history of the two-manual electronic organ. In today's music world, organs only play a very minor role. It is likely that a two-manual keyboard instrument in the home is next to the size too dominant.
Technics electric pianos
Technics Keyboards
Spare parts, repairs and service
Today, in 2018, Panasonic's support for the Technics musical instruments is completely set. Also at the company Keilitz in Leipzig it is no longer possible to get spare parts for Technics electric pianos or keyboards. As we are convinced of the quality of the electric pianos and keyboards, we continue to provide service for Technics keyboard instruments. In many cases we are able to repair electronic assemblies. Spare parts such as tactile switch, encoders or potentiometers are offered as new in OEM quality. Due to our very good contacts to different suppliers, we are able to offer replacement keys and contact rubbers partly as new. Everything else we offer as far as we can as used parts in a good quality. Especially for the used spare keys, we ask for your understanding that the color of the keys may differ. Due to aging of the keys, the keys are dimmed in many cases.