Yamaha

1 pcs. CCFL neon lamp 100 x 2,2 mm with cape  for LCD Display BacklightYamaha PSR-S700Yamaha PSR-S900Safety advice to CCFL tubes:These neon tubes are very sensitive. Handling and mounting must be done very very carefully.The fluorescent tubes are operated with a high voltage of approx. 180V AC. Please observe the corresponding safety regulations of the VDE. 

Recapping set for Yamaha TX802Attention: 230V EU VersionThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha TX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for complete recapping of Yamaha TX802 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

Recapping setYamaha MA60 Recapping Set PSUThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.If no longr available from Nichicon we use Würth or Rubycon Capacitors.This Recapping Set contains all necessary Capacitors for the PSU.The Capacitors are firmly soldered to a circuit board. For replacing the capacitor craftsmanship and experience in soldering is required. 

1 pcs. Yamaha FSX Stopper U 61This FSX keyboard is used in these modells and others:Yamaha Motif XS6Yamaha Tyros 2Yamaha Tyros 3Yamaha Tyros 4   

1 pcs. VR ACTUATOR for Yamaha XR780 Pedal Assembly

1 pcs. Relais NA-5W-K 5Vsuitable forYamaha DKC500

1 pcs. COIL ASS'Y (BL) L=50 WH SX100/RSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Black LCD Display with LED Backlight replacementYamaha S90We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for Yamaha S90:Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha S90:To replace the display in the Yamaha S90, remove the screws on the bottom edge. The S90 has a folding mechanism so that the upper part of the housing can be folded upwards. The display is then already accessible. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed.Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife.Mechanically, a piece of a small metal bracket must be sawn off. However, as this metal bracket can be easily removed from the appliance, this is a simple mechanical job.Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.   

1 pcs. CIRCUIT BOARD DM CLP-440MSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Yamaha SY35 OLED Display NEW yellow, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. CIRCUIT BOARD, DM PSR8000Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. CIRCUIT BOARD DM CVP-109Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha VL1MWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha VL1m:No soldering is required. To replace the display in the Yamaha VL1m, the front panel must be largely dismantled. However, this is a relatively simple replacement. No soldering is required. The display is supplied pre-wired.This work is to be done only by technically, best electrotechnically savvy people.  

Recapping set forYamaha  PSR-7000 PSUThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Safety note: This module has internal voltages of 300 volts. There is a very high risk of electric shock. Only suitable for electrical engineering specialists.Our recapping set is made up of Capacitors from Manufacturer Nichicon. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Power Supply UnitThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

Yamaha TX16W  Recapping Set 230 V completeThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.This set is for Europe - 230 VACSafety note: This module has internal voltages of 300 volts. There is a very high risk of electric shock. Only suitable for electrical engineering specialists.Our recapping set is made up of Capacitors from Manufacturer Nichicon. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the complete Rack unitThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

Recapping set Mainboard forYamaha CVP-85 CVP-87The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. POWER SWITCH ASSY CLP-170Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

Key's 16N unweighted suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-e403Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

1 pcs. Yamaha Disklavier DRIVE B Circuit Board XL114D0  -- Discontinued -- Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

Yamaha 14Y replacement keys  mechanical construction:The keys for this keyboard are not available individually. Only one octave with 12 keys or the end octave with 13 keys is available. 

1 pcs. Power cabel 2m with 2P plug for Yamaha  InstrumentsVDE testedCable: H05VV-F2G0,75mm²Socket: C10Mains plug CEE 7/7 earth contactLength: 2 m  

1 pcs. Yamaha MKH contact PCB FSX76 D2I+ KeyboardThis PCB is for high part in Keyboard 

1 pcs. Yamaha MKH contact PCB FSX76 D2I+ KeyboardThis PCB is for lower Keyboard part. 

1 pcs. Yamaha MKC contact PCB FSX76 D2I+ KeyboardThis PCB is for center Keyboard part.