Keyboards

1 pcs. Kawai PCB KKB-018 Pedal PCBThis circuit board is used in many Kawai pedals.A pedal no longer works for you? Small trim potentiometers are mounted on the circuit board. With these potentiometers the operating point of the respective pedal can be adjusted.Kawai uses light-sensitive sensors here. In daylight, the pedal has no function.

1 pcs. Nord Pedal Spring  

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Replacement:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes on installation the Display in Yamaha SY77 or SY99:The instrument must be disassembled almost completely to reach the display.  This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. HEC2305-016250 DC Power Jack with solder Pins for PCB mounting suitable for modelsRoland EP7 IItechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs 65W internal Switching Power Supply Unit brand new, suitable forE-mu E4KE-mu E-SYNTHE-mu E6400E-mu E4 PlatinumE-mu E5000 UltraE-mu E6400 UltraE-mu E4XT UltraDescription:This switching power supply is a perfect replacement for many E-mu devices. In many devices Emu has used the same power supply unit.Our brand new replacement switching power supply has exactly the same mechanical dimensions and the same connectors as the original power supply. Plug and Play.63 Watt power upgrade: The original E-Mu power supply has an output of 43 Watt and must be operated with an internal fan in any case. If extensions such as additional memory or additional drives are installed, the original power supply unit will not be able to supply this power. This is where a power supply upgrade comes in handy.Our 65 Watt power supply unit also needs a fan when the E-Mu is fully extended. Electrical properties:Primary input voltage: 90 - 264 VACRated Power: 63 WattEfficiency: 77%Ripple: 1%Tripple OutputShort circuit protectionEN6100 proofEMC: CLASS BPractical advice:Plug of the device. Don't work under Voltage.Make absolutely sure that the connection cables to the power supply have no contact with the cooling element of the power supply. Due to the development of heat, the insulation of the cable can melt and cause a short circuit or worse tripping. 

Yamaha tactile switch suitable for modelYamaha CLP-50Clavinova CVP20CVP-85AEX5Yamaha replacement part no.: KA906550The construction part is not longer built. The old serial number was KEC10901. With that serial number the part was built during the 80s. The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometerSlider Set suitable for modelsYamaha DX 7Yamaha DX9Yamaha DX11Yamaha DX21Yamaha DX27Yamaha DX100Set contains:1 pcs. Slider for Volume1 pcs. Slider for Data EntryUseful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

Spare parts for Yamaha C61KG KeyboardYamaha C61KG Keyboard is used inYamaha QS-300Yamaha QS-700Yamaha SY-22Color/tint: creme white

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha TG77We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha TG77:Inside Yamaha TG 77 is very little space for the new display. A circuit board is mounted behind the display, it is called switch panel. On this switch panel a number of diodes are soldered which can collide with the new display. It is highly advisable to move these diodes to the back of the switch panel.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Yamaha Montage Super Knob Rotary PotentiometerYamaha Montage 6Yamaha Montage 7Yamaha Montage 8Electrical properties:The stereo nominal resistance has 5 Kilo-Ohm, the electric resistance gradient is liniear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in one row in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

 1 pcs. PP Capacitor 4.7 nF SafetySafety film capacitor suitable for use in mains filters 

1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed. 

1 pcs. Wave Generator IC D5534A clonewe offer here a brand new clone of the original Roland Wave Generator Chip with some Mechanical Description:This Chip is manufactured by Analogue Renaissance with modern and actual SMD technic. The outline Dimensions and Pin configuration are same as the original Roland Wave Generator Chip MC5534A.Technical Hint:Mounting of this part requiers soldering.Integrated Circuits are  

Complete Set tactile switch suitable forAKAI MPC-1000Part Number: :  AKAI: ES-415015J and ES-349474  Delivery Quantity: 35The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

1 pcs. Encoder 22 mm suitable for some E-MU Systems instrumentsE-mu ESIE-mu E4XT     depends on manufacturing dateE-mu e6400   depends on manufacturing dateE-mu e-synth ultraE-mu Proteus 1Practical advice:this encoder was used in some few E-Mu Instruments. Please have a look in your instrument first if this is the right one for you. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs Cage Nut M6 for Rack Mounting  

1 pcs. Encoder 12 mm footprint and extra short axis suitable for models  --  discontinued --Korg M3Korg OasysKorg TritonKorg Triton leKorg Triton extremeKorg Triton ProKorg Triton ProXThis is the original Korg spare PartPractical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

Stereo slide potentiometer with 30mm travel and 15mm Lever. Suitable Volume Slider forKorg M3This volume control with the labelling EWANA0X15B14 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 k? (Kilo-Ohm), the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of black plastic and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

Volume Slide potentiometer with 30mm travel and 10mm Lever. Suitable forRoland FP-8Roland HP-900Roland HP-1700Roland HP-1700L This Lever is a little bit thinner than the original one.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

1 pcs.Card Edge Connector 22 Pol suitable forKorg PS3100Korg PS3200Korg PS3300

1 pcs. Black LCD Display replacement with LED Backlight ready mountedKorg Wavestation,Korg Wacestation A/DKorg Wavestation EXWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementPlease let us now your instrument.The cable must fit specifically to the instrument. Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, you have to solder on wire bridge in your synthesizer. And you have to cut some elektronic parts to take out of control old Backligth section.This work is to be done only by technically, best electrotechnically savvy people. 

1 pcs. Knob for rotary potentiometers inKorg Kronos 61Korg Kronos 73Korg Kronos 88ROTARY VR KNOB (KRONOS) X5870 VR KNOB(H) E30459-1  Specifications:Diameter top:        9 mmDiameter bottom: 10 mmHight:   14 mmShaft:   6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.

1 pcs. FS30KMJ-02Pch Power MOSFET Housing:  TO220VDss:      - 100VId:           - 30APd:          25WTechnical hint:The defect of the power MOSFET is only the secondary fault effect. Conclusion: replacing the MOSFET will not be a long-term fix.

1 pcs. FX30KMJ-03Pch Power FX30KMJ-03 Housing:  TO220VDss:      - 30VId:           - 30APd:          25WTechnical hint:The defect of the power MOSFET is only the secondary fault effect. Conclusion: replacing the MOSFET will not be a long-term fix.