Keyboards

1 pcs. Battery holder for CR2032Attention: Shipping for Europe only Technical Description:  Information for handling old Battery's

Keys, unweighted for Roland SK9 KeyboardThis part fits for all Roland SK9 KeyboardsRoland SK9 Keyboard is used inJP-8000Color/tint: pure white

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: pure white

1 pcs.  6 pin FFC cable with 2.54 mm pitch and 100 mm length6 pinPitch: 2.54 mmLength: 100 mmcontactlength: 7 mmcontacts same sideThese cable is used in Korg Poly 61 between KLM-475 and KLM-476Technical description

1 pcs. Slidepotentiometer with center click suitable for Yamaha CLP-150Yamaha CLP-170The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Flash ROM 16Mas replacement for MBM29LV160BE90TN Mechanical Description:This flash rom is housed in a TSOP48 package and is designed for SMD mounting on a circuit board. This part sensitive to static charge  

1 pcs. CR2450Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 24.7 mm and a thickness of 5mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

1 pcs. 14 pin FFC socket with 1.25 mm pitch14 pinPitch: 1.25 mmLength: 21,05 mmdeepth:  4,80 mmhight:      7,80 mmTechnical descriptionPraktikal tip:In these socket the cable cable have just to be pluged in.

Spare parts for Roland PA4 Keyboard Does a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken.This part fits for all Roland PA4 KeyboardsRoland PA4 Keyboard is used inRoland HP-237eRoland HP-555GRoland HP-7700Roland KR-370Roland KR-375Roland KR-570 und KR-575Roland KR-770Roland KR-1070Roland KR-4300Roland RD-500The S-Key fits in Keyboard PA4 AND PA4APlease have a look at the video for replacing Hammers.

1 pcs. Slider with 45mm Travel. Suitable for Kurzweil PC88The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Yamaha spezial IC for Power SupplyWe offer here a replica of the original Yamaha Power Stream IC. The replica is developed and distributed by Yamaha.Manufactured in modern SMD technology. With this your Disklavier will be functional again.Safety notice:Switching power supplies store high voltages of approx. 300 volts DC over a long period of time. This spare part is only for specialists with appropriate knowledge of electrical engineering.Technical Hint:This replica of the XK413A0 is a 1:1 replacement of the original Power Stream IC used by Yamaha in various switching regulator power supplies.Practical hint:The IC is firmly soldered onto a circuit board. Manual dexterity and experience in soldering are required for replacement.IC's are sensitive to static charge!  

1 pcs. OLED Display New forE-Mu Proteus 1E-Mu Proteus 2E-Mu Proteus 3To replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display.These different Display versions are available:BlueRed/OrangeYellowWhiteLifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

Roland Roland Juno 6 Fader Set comlete This Set contains:3 pcs. Fader 30mm    10KB1 pcs. Fader 30mm    10KA4 pcs. Fader 30mm    50KA4 pcs. Fader 30mm    50KB5 pcs. Fader 30mm   100KB2 pcs. Fader 30mm    1MA  Useful hint to Roland Juno 6 Fader Set:The lever on the original potentiometer is straight. The lever on the potentiometer offered here adapts to this shape because it is slotted.Arrangement of the solder pins: The solder pins on this replacement part are slightly offset. The solder pins must be bent slightly before soldering.The control is soldered firmly onto a circuit board. Replacing the control requires manual dexterity and experience in soldering. 

1 pcs. brand new white OLED Display forYamaha TG33We offer here a factory new OLED display as a replacement for the original LCD display that Yamaha had installed in the TG33. The OLED display is ready to install, no soldering required. Hints for mounting:In order to install this new OLED display in the Yamaha TG33, the mechanical assembly has to be carried out slightly differently to how it was solved with the original display. The original LCD display in the TG33 was screwed from the back onto retaining lugs provided in the housing. The new OLED can also be mounted in this way, but it is then quite far back and visually there is a tunnel effect from the outside. It makes more sense to screw the display onto the other side of the retaining lugs, because then the OLED display lies directly against the windscreen. For this installation, however, the entire housing of the Yamaha TG33 must be dismantled. This makes the installation more complicated.The new OLED display will be delivered by us ready wired. No soldering work is necessary for this installation. Scope of delivery:1 pc. new OLED display, ready wired Notes on disposal:every electronic component contains important raw materials that should be recycled. Please find out where in your city is a corresponding collection point for these components. 

1 pcs. brand new LCD Display with backlight suitable for  - Discontinued -Yamaha Disklavier MX100IIYamaha Disklavier HQ100SXThe LCD displays installed by Yamaha in the MX100, HQ100 or MX100II and HQ100SX disklavier series are now getting on in years. The original displays are very difficult to read in many disklaviers or the LCD displays are completely defective.We offer here the original Yamaha spare part. Scope of delivery:1 pc. new LCD display, ready wired Notes on installation:Please be aware that you are opening an electrical device that is supplied with 230 volts. This work should only be carried out by people who have the appropriate expertise. Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components. 

1 pcs. LCD display with LED backlightsuitable forRoland D-70, mainboard version 00Roland D-70, mainboard version 01We offer here a high quality replacement display with modern LED technology for the backlight.Color: white font/blue backgroundScope of delivery:Display with connection cableMounting accessoriesManual The delivery includes an already soldered cable and a connection adapter suitable for your mainboard.Please note the information at the end of the article description!Advantages of a display with LED backlight:much brighterhigh-frequency noise (beeping) of the transformer is eliminatedmuch longer lifetime of the backlight compared to the lifetime of EL-filmslower power consumptionNotes on assembly:The instrument must be almost completely disassembled to access the display.We strongly recommend to take the circuit part, which generates the backlight voltage for the old display, permanently out of operation.This procedure is described in the manual. This work should only be done by technically, preferably electrotechnically skilled people.CAUTION!Roland delivered the D-70 synthesizer with two revisions of the mainboard.In order to supply you with the correct version of the necessary connectors, it is important that you know the revision number of your mainboard before ordering this replacement display.Please order the version of our custom made, high quality replacement part that fits your D-70 synthesizer.This will save you from a possible wrong order.You will find the version designation in the upper left corner of your mainboard. Behind "ASSY 76237130" you will find either "01", or "02". 

1 pcs. LCD Display brandnew in Yellow forKorg M1Rthis is  a plug in ready Display replacement for Korg M1R . You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.These different Display versions are available:BlueblackWhiteYellowInstallation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-1000We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and white backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-1000. The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-1000 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.The color of the shown display on picture, may differ from the original.Color: Black Character  /  white BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask. 

1 pcs. Floppy2USB Adapter suitable for Yamaha SY-77Yamaha SY-99 

Replacement Keys and parts for Yamaha A KeyboardYamaha A keyboard is used inKorg 01/W ProXKorg T1Yamaha CLP-50Yamaha PF15Yamaha A Keyboard is a very old Keyboard with weighted keys.

1 pcs. Service Kit Kawai RH88B PWB Assy KKB-044(1)This service kit replaces the circuit boards and contact rubbers in the Kawai RH88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-040. The set consists of two boards, fully equipped with new contact rubbers.Compared to the original circuit boards, Kawai has extended the lifespan and refined the dynamic range.It is only possible to exchange this sentence completely. Mixing old boards or contact rubbers with new boards or contact rubbers leads to a malfunction.These Board fit in these e-pianos:Kawai CN17Kawai KDP110Kawai KDP120Kawai ES520Caution during disassembly: The operation LED on the front of the piano is plugged into the sensor board.

1 pcs Kawai Power Switch Board KEP-416   -- Discontinued --this PCB fits inKawai ES7Kawai ES8Mechanical Description: Practical advice:Plug of the device. Don't work under Voltage. 

Recapping set for E-Mu Orbit V2The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.This Recapping Set contains all necessary Capacitors for Switching Power Supply. Warning PSU Recapping:Risk of electric shock:Switching power supplys store high voltage and high energy for a very long period of time.When working with these spare parts offered here, you are working directly in a 230VAC circuit.Observe polarity. Incorrect installation will cause explosion and fire.For experts only: Be aware of dangers of electric current  

1 pcs tactile switch 7,3 mm for YamahaThese tact switch are soldered onto a circuit board. Manual skills and experience in soldering are required to replace the tact switch.why should I solder new pushbutton