Power Supply

1 pcs external Power Supply Unit Yamaha PA-300C Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

Yamaha PA-150A Power Supply Unit

1 pcs external Power Supply Unit Yamaha PA-130B Replacement for Yamaha PA-3B PSUReplacement for Yamaha PA-3C PSU Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Yamaha FU80 AC-IN BoardFor Europe only: 230VAC

1 pcs AC Power Inlet EU with Solder Pins for PCBCONNECTORINLET CCT2302-1372 ELB-02Ktechnical Dates:Termination Solder Pins2 pol Electrical properties CCT2302-1372 ELB-02K:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2,5 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs external Power Supply Unit Kawai PS-129Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Delivery only with secondary cable.Electrical properties:Primary: 100-230V ACSecundary: 12V DCCurrent: 4AUse: EuropePractical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Yamaha NU1X FU AC-IN BoardFor Europe only: 230VACUsed inYamaha CLP-675Yamaha NU1X

1 pcs. DC Power Jack HEC0757-01-030 for cable mounting suitable for modelstechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. POWER SWITCH ASSY CLP-170Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Power cabel 2m with 2P plug for Yamaha  InstrumentsVDE testedCable: H05VV-F2G0,75mm²Socket: C10Mains plug CEE 7/7 earth contactLength: 2 m  

1 pcs. Cap rectangular for power switchPlease note the dimensions. The original caps used to be larger on many instruments. 

1 pcs. Power Switch Assembly 100 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 100 cm

Power Switch Assembly 60 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 60 cm

1 pcs. Push Switch with solder Pins for PCB mounting suitable forRoland Juno 60 - Hold, Arpeggiotechnical Dates:Termination Solder PinSupplied without capPractical advice:Knowledge in soldering is required for switch replacement.

Single-pole push switch in the switch design - OFF with solder pins for PCB mounting suitable for modelsKorg Korg Part Number:The power switch corresponds to the ALPS switches SDDLD12200 TV3. This is no longer manufactured by ALPS.Termination Solder pinMounting PCBVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for PCB mounting. Therefor are tow solder pins as Snap-In pins in the front. The spacing of the snap in pins is 16 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 4 A at 250 VAC.Knowledge in soldering is required for switch replacement.

1 pcs. Power cabel 1.8 m with 3P plug and solderlugs

1 pcs AC Power Inlet with Solder Pins for PCBtechnical Dates:Termination Solder Pins2 polElectrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

DC Power Plug suitable for modelsRoland EP7 IItechnical Dates:Termination SolderingMechanical Description:The housing of the Power Plug is made of Plastic and cable is soldered on it.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsE-mu Launch-Padtechnical Dates:Termination Solder PinSchwitch: OpenMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for this replacement.

1 pcs AC Power Inlet PA125 with Solder Lug   -  Discontinuedtechnical Dates:Termination Solder Lug2 polThis is the typical Roland power socket used by Roland for many decades. Today, this socket is no longer available at Roland. Therefore only used power sockets are offered here. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

1 pcs external Power Supply Unit suitable for Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 5.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs. Yamaha FU160 AC-IN BoardFor Europe only: 230VAC

1 pcs. Yamaha switching Power Supply for HQ100SX DisklavierFrom our practical experience we know that this power supply unit, which is installed in the HQ100SX Disklavier from Yamaha, shows age-related defects. As a rule, this manifests itself in the complete failure of the power supply in this Yamaha Disklavier.Our Service:We can offer you the repair of this power supply unit. For the repair, it is sufficient if you have the power supply unit removed by a specialist electrical engineering company and send it to us. We will check and repair the power supply unit in our workshop.Safety notice:Switching power supplies store high voltages of approx. 300 volts DC over a long period of time. This spare part is only for specialists with appropriate knowledge of electrical engineering.  

1 pcs. Yamaha DC-IN PCB YA259 DiscontinuedThis DC-IN Circuit Board is used inYamaha P-155 For Europe only: 16VDC