Encoder

Filter
Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 2
No results were found for the filter!
Encoder Typ12 für Korg Pa Serie
Encoder Typ12 for Korg Pa series
Encoder 12 mm footprint and short axis suitable for models Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
6.89€ *
Encoder 22 mm für Nordstage 2 Maindial
Encoder 22 mm for Nord Norstage2 Maindial
1 pcs. Encoder 22 mm suitable for Nord NordStage 2 - Main Dial Practical advice: The encoders offered here come from the same manufacturer as those used by Nord. There are compared to the original small deviations in design: Pin distance...
10.71€ *
1 Stk. Encoder für Korg
1 pcs. Encoder for Korg
1 pcs. Encoder suitable for Korg Electribe EA1, ER1, ES1 Korg Electribe EMX1, ESX1 - nur EC1 - Main Dial Korg i4S, i30 Korg NS5R Korg PA80 Korg Trinity, pro, pro/x Practical advice: The thread of this encoder is 2 mm longer than the...
5.87€ *
Encoder EC24B50D
Encoder EC24B50D
1 pcs Encoder EC24B50D Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
35.70€ *
Encoder 22 mm für E-MU Systems
Encoder 22 mm for E-MU Sytems
1 pcs. Encoder 22 mm suitable for some E-MU Systems instruments E-mu ESI E-mu E4XT depends on manufacturing date E-mu e6400 depends on manufacturing date E-mu e-synth ultra E-mu Proteus 1 Practical advice: this encoder was used in some...
10.71€ *
Yamaha Encoder 16 mm
Yamaha Tyros Encoder 16 mm footprint
1 pcs. Encoder 16 mm widht suitable for Yamaha Tyros 1 Yamaha Tyros 2 Yamaha CVP-207 Yamaha CVP-209 Part numbers: Yamaha VU48130R REB161-PVB
8.45€ *
Waldorf Microwave 2 Encoder 16 mm ohne Rastung
Waldorf Microwave 2 Encoder 16 mm footprint...
1 pcs. Encoder 16 mm wide suitable for Waldorf Microwave 2 The Waldorf Microwave II has 4 of these encoders without detents. These encoders are mounted below the display. Practical advice: The axis of this encoder is 2 mm longer than the...
From 5.99€ *
Details
Waldorf Microwave 2 Encoder 16 mm mit Rastung
Waldorf Microwave 2 Encoder 16 mm footprint...
1 pcs. Encoder 16 mm wide with Detends suitable for Waldorf Microwave 2 The Waldorf Microwave II has one of these encoder with detents. These encoder is mounted beside the display. Practical advice: The axis of this encoder is 2 mm...
From 5.99€ *
Details
Roland XV5080 Encoder Board neu
Roland XV5080 Encoder Board new
1 pcs. Roland XV3080 and XV5080 Encoder Board new This Encoder PCB is suitable for Roland XV3080 Roland XV5080 Mechanical Description of Encoder Board: we deliver a brand new Encoder and a PCB for self soldering. The cable has to be...
10.95€ *
Roland JD800 Encoder Board neu
Roland JD800 Encoder Board new
1 pcs. Roland JD800 Encoder Board new This Encoder PCB is suitable for Roland JD800 Mechanical Description of Encoder Board: we deliver a brand new Encoder and a PCB ready mounted, herer you can just plug in the original cable. The cable...
14.45€ *
Encoder für Yamaha W5
Encoder for Yamaha W5
1 pcs. Encoder suitable for models Yamaha W5 Yamaha W7 Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
18.74€ *
2 From 2

Encoder

Rotary or sliding encoder

Encoders are analogue or digital electronic components that are used, for example, to change data values.
They are designed as rotary encoders, but often also as sliders. Together with the decoders, they form a logical unit or a functional chain.
In synthesizers, midi devices, samplers, electric pianos, and other electronic musical instruments, they are important input devices for changing data, entering texts, editing filter values, etc. their proper functioning depends quite a bit on their being in perfect working order.
The usefulness of a synth or sampler often depends on its proper functioning. If the encoder is defective or does produce unclear values, the device in which it is installed can usually no longer be used without errors.

Encoder malfunctions

Over time, encoders can be subject to wear and tear that leads to ambiguous or incorrect readings. This then manifests itself in the encoder being moved by the user to a certain position from which a certain result would be expected. Instead of displaying this correct, unambiguous value, the display of the device jumps back and forth between two values, for example. It may also be that certain values can no longer be approached. External mechanical influences could also have damaged the encoder. For example, between 0 and 30 everything is displayed correctly, but the range between 31 and 67 cannot be selected, although from 68 to 128 everything seems to work correctly again. Such errors indicate a defective encoder. Replacing the defective rotary or slide encoder very often restores a perfectly operable unit.

Encoder repair

Often, the defective encoder can be replaced relatively easily, whereas sometimes it is necessary to disassemble the entire unit in order to access the corresponding solder points so that the replacement can be carried out. Depending on the instrument, this can be quite time-consuming and, if you do not have the right tools and/or the manual skills, should rather be carried out by a specialist workshop in order to avoid lasting damage to your high-quality musical instrument. In this way, you will avoid subsequent costs due to improper handling, and you will also have your instrument repaired with the guarantee of a specialist workshop.
In our well-equipped workshop, we have circuit diagrams, instrument manufacturers repair instructions, special tools and measuring instruments, and can give your instrument the treatment it needs and deserves.
Make an appointment to have your electronic musical instrument repaired.
Write to us at.

Encoder Rotary or sliding encoder Encoders are analogue or digital electronic components that are used, for example, to change data values . They are designed as rotary encoders , but... read more »
Viewed