Products

1 pcs.MN3205 4096 Stage BBD DIP8The MN3205 is a 4096 stage low voltage operational (5Volt) BBD that provides a signal delay of up to 204.8 ms at clock frequnecy 10 KHz and is suitable for use as reverberation effect of audio equipment.Mechanical Description:The IC is housed in a DIP 8 package and is designed for trughhole mounting on a circuit board.Practical information to MN3205:The IC is permanently soldered onto a circuit board. Replacement requires manual dexterity and soldering experience.ICs are sensitive to static charge!

1 pcs. CABLE 5557-16R ME-10Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. LOUD SPEAKER 1.9CM 6 OHM 45W NU1Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. LOUD SPEAKER3.5CM 8OHM 20WSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. LOUD SPEAKER 2.5CMSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. FFC Kabel 25 Pol 1 mm pitch 100 mm same side contacts

1 pcs. Yamaha Keyboard grease VGA22400 for Key Cover 50g Original Yamaha plastic grease for Slide Key CoverColor is clear and will be delivered in a 50 gramm portion. 

1 pcs. METER,VU P-2200Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. QUICK DISK UNIT QD284 EMQ1Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. POWER TRANSFORMER IEC E F01Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. POWER TRANSFORMER V,W,M,E,B,A,D HS-7Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. POWER TRANSFORMER H,B P4500Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. LCD UNIT FX500Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 set Korg Wavestation sidepanels L+R PadoukAdd elegance of burgundy wood to black metal of your black keyboard housing!Custom Side Panels for Korg Wavestation – Padouk Wood (Burgundy Finish)are produced by Kerbstück from Wermelskirchen in Bergsichen Land.Upgrade your Korg keyboard with this elegant pair of handcrafted side panels, made from genuine Padouk wood. Known for its rich reddish-burgundy hue and striking grain patterns, Padouk adds a bold, professional touch to your instrument.The surface is finely sanded and sealed with open-pored oil.Perfect for musicians seeking a blend of functionality and visual appeal, these panels offer both protection and an artisan-quality upgrade to your instrument's aesthetics.Customised engravings for these side panels and a version for AirTAG are available on request directly from www.Kerbstueck.de.Scope of delivery:One side panel left and one side panel right.The original fastening screws can be reused. Sample pictures of Korg Wavestation side panels:Every single set of these side panels for Korg Wavestation is unique. For this reason, the the photos of the product here are only sample photos. 

1 pcs.  Roland JD800 FFC cable 26 pinKeyboard connection cablein Roland JD-800 Service Manual this cable is called FUJI CARD 26x420This cable is the connection cable between the Mainboard in Rolands JD800 and the Contact Board Assy under the Keyboard.There are 2 different keyboard cables in the Roland JD-800:According to our research, there exists two different keyboard versions in Roland JD-800, which means there are two different versions used of this cable. The difference in this cable is, in one type of this cable contacts are on the same side of cable. In second type of this cable contacts  are on one side on top and and on the opposite side at the other end of the cable contacts are down under.Please take a close look at your Roland JD-800 before ordering this cable. We have both cable versions on offer.This cable was produced in Germany in best qualtity.Length = 430 mmSame side connector 

1 pcs. Roland V-Synth Potentiometer for TVAfit nRoland V-Synth - TVARoland VP-550  - MIC direct / Ensemble Level This Fader with the labelling EWANKEC15B14 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part. Electrical properties:The nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of metall and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The potetniometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1PCS 2SC3064F 2SC3064 3064 Transistor DIP6Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS 2SC3064F 2SC3064 3064 Transistor DIP6Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS Transistor 2SA743ASemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS Epitaxial Planar NPN Silicon Transistor Low rbb' Low Noise AmpSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS Transistor PNP 2SB737 ROHMSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS 2SC3182 TRANSISTOR PC1602Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS 2SA561 TRANSISTORSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1PCS 2SA1265 TRANSISTOR R.O  PC1602Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.