Products

1 pcs. IC AD1865N DAC P100Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC YM2121 FSSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC HD6433308RA99F CPU P100Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC HG62E11R54FS GATE ARRAY TG100Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC PCM69AP-2 DAC EL5-7 CLP121Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC HM65256BLSP-10 PSR 256K TG100Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC UPC4570HA DSP-1BSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. IC YMW259-F GEW9 KB200Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. TRANSISTOR 2SC2261Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals or AMP Termination Solder LugMounting  with threadVDE-tested Mechanical Description:The housing of the switch is made of plastic. The switch is provided for a screw in a housing and has one thread for M12 x 0.75.  The switch itself has a width of 14 mm, a length of 29.5 mm and a depth of 15 mm. The protruding switching element has a length of 17,5 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 6.3 mm. Knowledge in soldering is required for switch replacement.  

1 pcs. Mainboard repair for Korg SP-250 E-PianosThe circuit board is repaired and tested by us and is fully functional after the repair. We offer a one-year warranty on this repair.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard. 

1 pcs. Fader knob suitable for:Technics KN5000Color: Black

1 pcs. IC Socket DIP 24 Gold for ICTechnical Hint:Mounting of this part requiers soldering.  

1 piece Fuse 5x20 mm 250V T2.5A time-lag  

1 pcs. FFC cable 20 Pol Pitch 1,00 L=110 mm

1 piece Fuse 5x20 mm 250V T0.315A time-lag  

1 piece Fuse 5x20 mm 250V T0.5A time-lag  

1 piece Fuse 5x20 mm 250V T0.63A time-lag  

1 piece Fuse 5x20 mm 250V T0.8A time-lag  

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forYamaha VL1MWe offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  Yellow BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha VL1m:No soldering is required. To replace the display in the Yamaha VL1m, the front panel must be largely dismantled. However, this is a relatively simple replacement. No soldering is required. The display is supplied pre-wired.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. blue LCD Display with LED Backlight replacement including cable Kit forYamaha VL1MWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha VL1m:No soldering is required. To replace the display in the Yamaha VL1m, the front panel must be largely dismantled. However, this is a relatively simple replacement. No soldering is required. The display is supplied pre-wired.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. Encoder 16 mm widht suitable forYamaha S90    

1 pcs. Contact rubber for Roland SK3 KeyboardsRoland has built in his keyboard instruments built in the 1990's essentially always the same keyboard. Fortunately, there are still contact rubbers for this keyboard today. These contact rubbers are NEW.technichal dimensions for contact rubber:No of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greytechnical description of Roland SK3 contatct rubber:A contact rubber with 12 contacts covers one octave. The contact gumi with 13 contacts is needed once in a 61' keyboard. All contact strips are mechanically divided into blocks of 4 contacts. A contact rubber can always be divided or cut off at the end of a 4's block.Number of contact rubbers needed for a complete keyboard.61 keys: 4 x 12 contacts and 1 x 13 contacts76 keys 7 x 12 contacts88 keys 8 x 12 contacts 

1 pcs. Yamaha HE A88 Keyboard complete--- shipping only in germany, sorry  -----Please ask if this keyboard is the right one for your e-piano model.This keyboard was used for many years in the vast majority of Yamaha electric piano models.The replacement of the entire keyboard is from a certain age of the electric piano well worth considering.For example, if your original keyboard is affected by the grease problem, you have here an alternative after desen exchange you no longer have to worry about the keyboard.If the keyboard is not in stock, we can order the keyboard from Yamaha. There may be a delivery time.