Products

Mini Din plug male 8 pin for printed circuitthis mini din plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN plugs. It can be a 4 pole or a 8 pole version.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

DIN socket female 8 pin for printed circuit These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Mini Din socket female 4 pin for printed circuitthis mini din Plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN sockets. Sometimes it is a 4 pole or in other cases it is a 8 pole socket.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

MIDI DIN socket female 5 pin for printed circuitused in: Korg SP250 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5066 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

Cable with plugs QEXG-VH06015 for Technics Speaker, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111This cable is used inside the E-Piano to connect Speaker in E-Piano Stand.

1 pcs. FFC cable 16 pin 1,25 mm pitchKeyboard connection cable This cable connects the PCBs in your Roland Keyboard

1 pcs. FFC cable 16 pin 1,25 mm pitchKeyboard connection cableLength = 600 mmPitch= 1,25 mmBoth sides have the same connector  

1 pcs. FFC cabel 22 pin 1,25 mm pitchKeyboard connection cableLength = 600 mmBoth sides have the same connector  

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Phone Jack 1/4 inch, Stereo for printed circuitSpecification:StereoThread: UNF 7/16 InchHousing: PlasticThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Single-pole push switch in the switch design - OFF with solder pins for PCB mounting suitable for modelsKorg Korg Part Number:The power switch corresponds to the ALPS switches SDDLD12200 TV3. This is no longer manufactured by ALPS.Termination Solder pinMounting PCBVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for PCB mounting. Therefor are tow solder pins as Snap-In pins in the front. The spacing of the snap in pins is 16 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 4 A at 250 VAC.Knowledge in soldering is required for switch replacement.

1 pcs. Single-pole push switch in the switch design - OFF with solder Pins for PCB mounting suitable for models technical Dates:Voltage: 250VACCurrent: 5ATermination Solder PinVDE-tested Supplied without capMechanical Description:The housing of the switch is made of Plastic. The switch is provided for P.C.B. mounting. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 12,6 mm, a length of 17 mm and a height of 12.80 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. Single-pole Power Switch in the switch design - OFF with solder pins for PCB mounting suitable for modelsKorg Korg Part Number:Termination Solder pinMounting PCBVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for PCB mounting. Therefor are tow solder pins as Snap-In pins in the front. The spacing of the snap in pins is 16 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 4 A at 250 VAC.Knowledge in soldering is required for switch replacement.

1 pcs. Power cabel 1.8 m with 3P plug and solderlugs

1 pcs AC Power Inlet with Solder Pins for PCBtechnical Dates:Termination Solder Pins2 polElectrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

DC Power Plug suitable for modelsRoland EP7 IItechnical Dates:Termination SolderingMechanical Description:The housing of the Power Plug is made of Plastic and cable is soldered on it.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsE-mu Launch-Padtechnical Dates:Termination Solder PinSchwitch: OpenMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for this replacement.

1 pcs external Class A Power Supply Unit equivalent to Yamaha PA-150ANo original Yamaha spare part!The advantages of this external power adapter for Yamaha Epianos or workstations are      brand manufacturers     low residual ripple         Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 5.5 mm outside diameter. Electrical properties:Secondary voltage: 12VDCCurrent: 2ACE / GS testedPractical advice:Plug of the device. Don't work under Voltage.

1 pcs. Transformer Technics PX101, PX103, PX111This Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

1 pcs. Transformer Technics PX107This Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

1 pcs. Transformer Technics PX73This Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

LED-tactile switchLED colour: yellowThe construction part is not longer built. The old serial number was KHJxxx. With that serial number the part was built during the 80s.Be sure to take care of the polarity while inserting the part:The long pin is the positive pole (anode), the short pins are the negative pole (cathode).The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

Mainboard repair with expansion QJBG2150 for Technics E-PianosTechnics SX-PX107These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.