Yamaha CVP Serie

Pedal Assembly for Yamaha E-Pianos XR780On this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket.Depending on the model, this pedal was supplied with a potentiometer or contact rubber in the damper pedal. Please be sure to check the pedal before ordering a replacement part. 

1 pcs. Yamaha Pedal screwDimensions: M6 x 57 mmNote:At 38 mm, this pedal support bolt has a longer thread than the one under item numberSCYA-WF054500

1 pcs Yamaha Contactrubber 88P newThis contact rubber was installed in different Yamaha keyboards and there are different spare part numbers for this spare part.A note about the contact rubbers: The contact rubber for the 88's keyboard was available in the colors pink and green. The pink contact rubber is missing 2 holes in the rubber which serve as a guide.The green version is no longer available.Note for the installation of the Yamaha contact rubber:Please pay attention to the installation position! The interruptions in the Konaktstreifen are not symmetrical. 

1 pcs. Slidepotentiometer. Suitable for Volume Slider inYamaha CLP-545Yamaha CLP-565GPYamaha P-125This potenziometer is used for volume control, but it is a mono potenziometer. Not Stereo and this is correct in this case.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Encoder 16 mm widht suitable forYamaha Tyros 1Yamaha Tyros 2Yamaha CVP-207Yamaha CVP-209 Part numbers:Yamaha      VU48130R  REB161-PVB  

1 pcs. Replacement stereo rotary potentiometer 14mm suitable forYamaha PSR-S900Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

Mini Din socket female 6 pin for printed circuitthis mini din socket is used in older Yamaha E-Pianos for connecting foodswitch.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Slidepotentiometer. Suitable for Brillinace Slider inYamaha This slider has center clickThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 piece Yamaha Pedal PCB X0193 for E-Pianos V7675600This PCB for Yamaha pedal unit is used in pedals in which three potentiometers are installed.For final use, parts on the board still have to be broken off. The break edges are marked and perforated accordingly. This can be done easily and without tools. 

1 pcs. CIRCUIT BOARD DM CVP-109Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

Recapping set Mainboard forYamaha CVP-85 CVP-87The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 pcs. 1,44 MB Disc ALPS DF354H 

1 pcs. Mainboard for Yamaha CVP-207 E-PianosThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard. 

1 pcs. Mainboard for Yamaha CVP-209 E-PianosThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard. 

1 pcs. Rotary Potentiometer suitable forYamaha CVP-203Yamaha CVP-205Yamaha CVP-207Yamaha CVP-209 Electrical properties:The nominal resistance has 10 Kilo-Ohm, the electric resistance gradient runs linear.Appearance (technical characterisation):The casing measures 14 x 11 mm, the total length without pins is 15 mm. In this total length the casing is 6 mm long. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of brass. Its head has ends in corner radius.The nine solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2 mm. The pins, which are sticking out  are necessary for the electrical function. Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. brand new 10 inch extern LCD Display for Yamaha CVP seriesYamaha has been using color displays of various sizes in the Clavinova CVP models for many years. Displays are subject to natural aging, which leads to the fact that the displays are increasingly difficult to read. Even a readjustment of the contrast is no longer sufficient at some point. Yamaha has a very good spare parts supply for the Clavinova series. However, Yamaha cannot supply the original displays as replacements in all cases.We offer here an external HD LCD display that connects to the external video out of your Yamaha Clavinova CVP model. This ecternel Display shows same screen information as internal Display.The display resolution must be adjusted in many cases from 4:3 to 16:9 so the new display may be slightly blurred.Not an original spare part from Yamaha.Scope of delivery for extern Yamaha Clavinova LCD:1 pc. new LCD display, stand and cable for EU Attention: The color of the display shown may differ slightly from the original.  Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components. 

1 pcs. Yamaha GHD CL A88 Keyboard complete This keyboard is used in these modells:Yamaha CLP-150Yamaha CLP-320Yamaha CP-40Yamaha CP-50Yamaha CP-300Color: cremewhite--- shipping only in germany, sorry  ----- 

1 pcs. FFC cable 20 Pol Pitch 1,00 L=110 mm

1 pcs. Yamaha GH3 GKS A88 Keyboard completeThis keyboard is used in these modells:Yamaha CLP-170Yamaha CLP-230Yamaha CLP-265GPYamaha CLP-270Yamaha CLP-430Yamaha CLP-465GPColor: cremewhiteShipping only with UPS and within Germany. Sorry. 

1 pcs LCD Display forYamaha CVP-309Yamaha Tyros 2