Technics SX-PX103
1 pcs. Cover Technics PX103Under this Cover htere are User control buttons and switch.Used item, maybe there are some scratches !!!
MMBT3904Transistor MMBT3904 SMD replacement for 2SD601Aaund 2SB709A
1 pcs. M5238AL Dual Operational Amplifier with low noise for audio applicationThis OP-Amplifier is downgrade compatible with:M5218ALMechanical Description:The Amplifier is housed in a SIP 8 package and is designed for trughhole mounting on a circuit board. The Amp has 1 x 8 connecting pins with grid of 2.54 mm.
Socket 5 pin for printed circuits These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
Mini Din socket female 4 pin for printed circuitthis mini din Plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN sockets. Sometimes it is a 4 pole or in other cases it is a 8 pole socket.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
Cable with plugs QEXG-VH06015 for Technics Speaker, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111This cable is used inside the E-Piano to connect Speaker in E-Piano Stand.
1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Â
1 pcs. Transformer Technics PX101, PX103, PX111This Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.
1 pcs. Mainboard repairing for Technics E-PianosTechnics SX-PX101Technics SX-PX111These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.Â
Headphone Circuit QJBG2108, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111These Mainboard is tested by us and fully working. We sell it with one year warranty.
AC-IN Circuit QJBG2160 for Technics, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111These board is tested by us and fully working. We sell it with one year warranty.Â
1 pcs. Jack Circuit QJBG2149 for Technics, usedTechnics SX-PX101Technics SX-PX103Technics SX-PX111Pedal Socket: Mini Din 8 PolThese board is tested by us and fully working. We sell it with one year warranty.
1 pcs. Technics Tapping Screw XTN4+50AFZ Keyboardscrew These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Dimensions: 4 x 50 mmScrew XTN4+50AFZ in Service Manual.
Speaker plug 6 pin for Technics E-PianosThis plug is used in Technics E-Pianos for connecting the speaker sitting in the Stand fomr the Piano.
Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.
versenkbare Tastaturabdeckung für Technics E-PianosTastaturabdeckungMontageschiene AluminiumStange, AluminiumHalter für StangeZahnradBei E-Pianos oder Digitalpianos von Technics ist es Standard das es eine versenkbare Tastaturabdeckung gibt. Die Tastaturabdeckung wird leicht angehoben und rollt dann sehr leicht in das innere des Pianos und gibt die Tastatur frei.Die Tastaturabdeckung ist ein Deckel der aus dem gleichen Material gefertigt ist wie der Korpus des Pianos. In der Regel ist das Spanplatte oder MDF-Platte. An der Vorderseite ist wahlweise eine Aluminiumschiene oder ein Holzsteg befestigt durch den der Deckel im geschlossenen Zustand auf dem Korpus des Pianos aufliegt. An der Rückseite ist eine durchgehende Aluminiumstange montiert. An jedem Ende dieser Stange ist ein Zahnrad aus Kunststoff befestigt. Diese Zahnräder bewegen sich auf Zahnstangen die im innern des Pianos am Korpus befestigt sind.
Technics PX103 E-Piano without sound
Your Technics electric piano has no more sound? The power indicator (red LED) on the front left indicates that the electric piano is on. But you here no sound. In the vast majority of cases it is also so that the control LEDs and the operator panel do not work.
This misbehavior of the Technics PX103 is very well known to us. Essentially, this error is due to the aging of electronic components. We can also solve this problem and repair it. You do not need to send us the whole electric piano. No need. It's enough if you remove the motherboard from your electric piano and send it to us. We then test and repair your electric piano motherboard in our workshop. You have no idea what the motherboard is or you do not dare to screw it on the electric piano in general? Then ask a technically savvy person in your area or the electrician next door. These people can definitely help you.
Technics PX103 E-Piano with noisy keys
The keys of your Technics electric piano clatter loudly. You may hear a metallic clack when you release the keys? Your Technics PX103 piano has a built-in hammer mechanism keyboard. This means that under the key a hammer sits which is moved with each keystroke. In the resting position, this hammer rests on a felt. During the years of operation of your electric piano this felt wears out. Due to this wear of the piano felt, this hammer strikes the frame or the case of the your e-piano.
The whole thing can be solved by replacing the felt. We offer two different solutions for this case. The simple solution is. That you put an extra felt in front of the worn out felt. This solution is easy and fast. The second, more elaborate solution is to replace the old and worn out felt with a new felt. Unfortunately, it is quite expensive to completely remove the old felt. Gluing in the new felt is easy again.
Technics PX103 spare parts and replacement keys
Looking for a spare part for your Technics PX103 e-piano? We have many spare parts for Technics E-Pianos like replacemet keys, springs or key guides in stock. You are looking for other wearing parts such as felt or switchs. Even in these cases, we can help out with brand new spare parts. We offer you repaired electronics assemblies new power cables and replacement speakers for your Technics PX103 in our online shop to install yourself.