Technics PR-Serie E-Pianos

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with white line

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with brown line

Power Switch Assembly 60 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 60 cm

1 pcs tooth rack for keyboard cover guide right for Technics E-Pianos PR170-PR370 This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic

1 pcs tooth rack for keyboard cover guide left for Technics E-Pianos PR170-PR370 This rack is mounted inside the E-Piano. On this rack runs the keyboard cover. This rack is made of plastic

1 pcs. holder QMRG7029A for Technics E-PianosThis part is made of plastic

1 pcs. holder QMRG7028for Technics E-PianosThis part is made of plastic

1 pcs. M5238AL Dual Operational Amplifier with low noise for audio applicationThis OP-Amplifier is downgrade compatible with:M5218ALMechanical Description:The Amplifier is housed in a SIP 8 package and is designed for trughhole mounting on a circuit board. The Amp has 1 x 8 connecting pins with grid of 2.54 mm.

1 pcs. PCM69AU Digital-Analog-Converter for audio application forResolution:                    18bitInterface:                      seriellNumber of DAC outputs: 2Number of channels:      1Case:                           SOIC 20warm-up time:               1 minMechanical Description:The digital to analog converter is housed in a SOIC 20 package and is designed for SMD mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 10 connecting pins with grid of 1.27 mm x 7.4 mm.Technical Description:The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. For operation, no external components, such as temperature compensation or similar is required.It is a supply voltage of + 5V needed.

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Mainboard for Technics E-Pianos Technics SX-PR170Technics SX-PR270Technics SX-PR370These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

Amplifier/Power Supply Board for Technics E-PianosTechnics SX-PR170Technics SX-PR270Technics SX-PR370These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

1 pcs. Mainboard Repair for Technics E-PianosTechnics SX-PR603Technics SX-PR703The circuit boards are tested and repaired by us. After successful testing of the circuit boards, we give you a one-year guarantee.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard. 

1 pcs. Amplifier/Power Supply Board for Technics E-PianosTechnics SX-PR603These AMP-PSU Board is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

1 pcs. Jack Circuit QJBG2098 for Technics, usedTechnics SX-PX73Pedal Socket: Mini Din 8 PolPotentiometer for TuneThese board is tested by us and fully working. We sell it with one year warranty. 

1 pcs. Technics Tapping Screw XTN4+50AFZ Keyboardscrew These screws were removed and tested from a Technicsdevice.The N-Numbers from the service manual are assigned differently depending on the device.To avoid misunderstandings, we use the screw designations from the manual.Dimensions: 4 x 50 mmScrew XTN4+50AFZ in Service Manual.

1 pcs. Transformer Technics PR603This Transformer is usedd and in a good condition.suitable forTechnics PR603technical Hint:The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

1 pcs. brand new LCD Display with blue LED backlight suitable forTechnics PR-602Technics PR-702Technics PR-902Technics PR-603Technics PR-703Technics PR-903Technics PR-1000The LCD displays built into the PR-603, PR-703 or PR-903 e-piano series by Technics are now aging. The original displays have a small fluorescent tube, a so-called CCFL backlight, as backlight. It is possible that only the backlight is defective or the whole display is defective. This can be that only single pixels in the display are missing or whole lines in the LCD no longer work. In extreme cases, entire areas of the screen can also fail. If only the CCFL backlight is defective you can use a new fluorescent tube. The whole thing requires very calm hands and patience because these backlight tubes have a diameter of only 2 mm. Therefore they are very sensitive and delicate. Here it is also necessary to solder. As an alternative we offer a replacement LCD equipped with modern LED backlight. If the display already has major defects or if you want to save yourself the soldering effort, this replacement display is a good choice. Scope of delivery:1 pc. new LCD display, ready wiredAssembly materialshort installation instructions Notes on installation:Please be aware that you are opening an electrical device that is supplied with 230 volts. This work should only be carried out by people who have the appropriate expertise.We have prepared everything so that the installation on your electric piano is as easy as possible. With the replacement display you will receive all the necessary parts for the installation. No soldering work is required. All cables are plugged in.  Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components. 

Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.

versenkbare Tastaturabdeckung für Technics E-PianosTastaturabdeckungMontageschiene AluminiumStange, AluminiumHalter für StangeZahnradBei E-Pianos oder Digitalpianos von Technics ist es Standard das es eine versenkbare Tastaturabdeckung gibt. Die Tastaturabdeckung wird leicht angehoben und rollt dann sehr leicht in das innere des Pianos und gibt die Tastatur frei.Die Tastaturabdeckung ist ein Deckel der aus dem gleichen Material gefertigt ist wie der Korpus des Pianos. In der Regel ist das Spanplatte oder MDF-Platte. An der Vorderseite ist wahlweise eine Aluminiumschiene oder ein Holzsteg befestigt durch den der Deckel im geschlossenen Zustand auf dem Korpus des Pianos aufliegt. An der Rückseite ist eine durchgehende Aluminiumstange montiert. An jedem Ende dieser Stange ist ein Zahnrad aus Kunststoff befestigt. Diese Zahnräder bewegen sich auf Zahnstangen die im innern des Pianos am Korpus befestigt sind.

Spare Parts for SK25 Keyboard Here you will find parts for SK25 Keyboard, like Felts, Springs and Contact Rubber

1 pcs. Technics ASUB Circuit Board QJBG2298 repairedTechnics SXPR-602Technics SXPR-603Technics SXPR-702Technics SXPR-703These circuit board was repaired by us and is tested  and fully working.important note - complex electronic errorFaults in the amplifier circuitry of these Technics electric pianos are very complex and require extensive electronics knowledge and professional experience.A new ASUB board is only part of the solution.We do not assume any warranty if a new ASUB board is inserted into a defective amplifier.