Nord Stage Series

1 pcs Nord LED lens surround 6 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

1 pcs. Encoder 22 mm suitable forNord NordStage 2  - Main DialPractical advice:The encoders offered here come from the same manufacturer as those used by Nord. There are compared to the original small deviations in design:Pin distance here is 2.5 mm compared to 5 mm for the originalOriginal encoder does not have an "anti-rotation pin". This anti-rotation pin must be cut off at the new encoder.Mounting clip is not needed in many cases at Nord and can be removed. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Clavia Nord 3 way Power Supply IEC14 12P Connector  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 12-pole ribbon cableThis Power supply deliver:+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

1 pcs Clavia Nord PSU Transformer 22770 Electrical properties of 22770:Primary: 230 V AC or 2 x 115 V ACSec: 4 x 7,5 Volttransformer for PCB mountingPractical advice:Plug of the device. Don't work under Voltage. 

Nord LED lens, 6 arrows The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

1 pcs. Clavia Nord 4 way Power Supply IEC14 V1.3  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 10-pole ribbon cableThis Power supply deliver:+ 3.3 Volt+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

1 pcs. Nord Rotary Potentiometer vertikal 12 mm with center click, 10kOhm  Electrical properties:The nominal resistance has 10 kilo-Ohm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 12 x 11 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. Clavia Nord cape for Encoder older modells Praktical tip:The knobs are just plugged on. No tools are needed. 

1 pcs. Nord duo-pole push switch in the switch design - OFF with solder Pins for Kable mounting suitable for modelsClavia Nord instrumentstechnical Dates:Voltage: 250VACCurrent: 6ATermination Solder VDE-tested Supplied without capMechanical Description:The housing of the switch is made of Plastic. The switch is provided for soldering. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 15 mm, a length of 30 mm and a height of 9 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. Clavia Nord Knob Encoder older modells Praktical tip:The knobs are just plugged on. No tools are needed. 

1 set Nord Stage 2 sidepanels L+R Olive woodfit forNord Stage 2 - 76Nord Stage 2 - 88 everything in red might be boring in the long run?Beautiful and handmade wooden side panels for your Clavia Nord Stage 2.The Kerbstück joinery from Wermelskirchen in Bergsichen Land produces these side panels. The wood used for these side panels offered here is olive tree wood. This wood of the olive tree is very strong in character and has a distinctive grain.Customised engravings for these side panels and a version for AirTAG are available on request directly from www.Kerbstueck.de.Scope of delivery:One side panel left and one side panel right.The original fastening screws are reused.Instructions for mounting the side panels on the Clavia Nord Stage 2:The side panels are screwed on and can be easily replaced. Nord always uses a washer or a snap ring. Do not forget to transfer these to the new side panels. Sample pictures of Nord Stage 2 side panels:Every single set of these side panels for Nord Stage 2 is unique. Characterised by the individual structure of the olive wood, each Nord Stage 2 instrument is unmistakably unique. For this reason, the pictures shown here can only be sample photos. 

1 pcs Nord LED 15 lens assembly, for rotary encoder The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED  lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

1 pcs Nord LED eight bezel, for arrow The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

1 pcs Nord LED lens shield 15 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

1 pcs. Fatar Keyboard TP100 76 Tasten complete--- shipping only in germany, sorry  -----This Keyboard is for Nord models:Nord Stage 2 HP76Nord Stage 2EX HP76Nord Stage 3 HP76The replacement of the entire keyboard is from a certain age of the electric piano well worth considering. 

1 pcs. Fatar Keyboard TP100 76 Tasten complete--- shipping only in germany, sorry  -----This Keyboard is for Nord models:Nord Stage 2 HP76Nord Stage 2EX HP76Nord Stage 3 HP76The replacement of the entire keyboard is from a certain age of the electric piano well worth considering.