Korg Kronos-Serie

Replacement stereo rotary potentiometer 14mm widht suitable forKorg KronosElectrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. new Korg LS88 PCB Assy KeyboardThis keyboard is used inKorg Kronos 2 LS88this is set of three contact PCB as used in Korg Kronos 2 LS88.This set contains LOW, MID ans HIGH contact PCB.This Set is KLM-3543, KLM-3544, KLM-3545. 

1 Set Korg Pitch Bend Potentiometer witch PCB KLM2304 / KLM2305This is a replacement Poterntiomter for Korg Pitch Bender. This Potentiomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.This is a set of two Potentiometers for Korg Pitch Bend.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Replacement for PCB KLM2304 and KLM2305Useful hint:This Potenziometer is ready mounted on the PCB. For replacement you have only to connect the cable.

Contact rubber for Korg SK4 KeyboardContactrubber with 12 contacts are discontinued.Strip bright:   26 mmStrip height:     9.5 mmStrip length:  164 / 179   mmNumber of contacts: 12 or 13A rubber contact strip consists of 12 contacts and covers an octave. For the complete exchange of the contact strips in a keyboard with 61 keys 4 contact rubbers with 12 contacts and 1 contact rubber with 13 contacts are required.

1 piece Contact rubber 13 points for Korg LS-P88W KeyboardContact high:  9,8 mmStrip bright:   21,5 mmStrip length:  178   mmNumber of contacts: 13A contact strip consists of 13 contacts and there are only these 13 contact rubbers for this keyboard. However, 12 contact rubbers are predominantly used in the keyboard. The contact rubber is then shortened accordingly (cut off).For complete replacement of the rubber contact strips in a keyboard with 88 keys 7,3 contact strip are needed.

Spare Parts for RH3 KeyboardHere you will find parts for RH-3 Keyboard, like Felts, Springs and Contact Rubber

1 pcs Korg Grandstage cap for Power Switch Technical Description: Practical tip:The cap is placed on the pin of the power switch.