Keyboards

1 pcs. Kurzweil  tactile switch  The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Modal Sysnthesizer tactile switch The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Yamaha S90ES KNOB S, ENCODER Data Dial

1 pcs. Yamaha Tyros 4/5 SLIDER KNOB used at SONG, ASSIGN, 1−8

1 pcs. Phone Jack 1/8 inch - 3.5 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha InstrumentsJalco phone jack YKB21-5352This phonejack is a stereo jack socket with 7 solder legs. In addition to the signal contacts for stereo signal transmission, this jack has 2 switching contacts that are designed as normally closed contacts. These jack sockets are basically downwards compatible. For example, this 7-pin socket can also be used for the 3-pin version. To do this, it is sufficient to cut the extra soldering legs.Furthermore, there are two plastic noses on the underside, which are intended as a guide and holding tiller. These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Varta CR2450 with 3 solder pinAttention: Shipping for Europe only Technical Description:The dimensions of CR2450 are diameter of 24 mm and a thickness of 5 mm. Due to the soldering legs, the installation height is 10 mm for this horizontal version. The positive pole owns two interconnected soldering legs at a distance of 10 mm. The negative pole has one solder leg.Practical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

Yamaha VL1 Keyboard Recapping Set completeThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Safety note: This module has internal voltages of 300 volts. There is a very high risk of electric shock. Only suitable for electrical engineering specialists.Our recapping set is made up of Capacitors from Manufacturer Nichicon as possible. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the complete Rack unitThe Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

1 piece 7-Segment with 2 Digits, Redthis 7-segment with 2 digits fits perfect in these InstrumentsRoland Juno 106The Items are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

1 pcs. new Blue LCD Display with LED Backlight replacement forALESIS Andromeda A6We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character on Yellow BackgroundAttention: The colour of the display shown may differ slightly from the original, e.g. due to your screen settings.  Delivery scope:Display, prepared ready to plug inMounting partsBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beeping) is eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:This work should only be carried out by people who are technically, preferably electrotechnically, experienced.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Kawai  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Encoder with short axis suitable for modelsAkai MPC-2000XLPractical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. tactile switch suitable for modelsAkai MPC-3000Akai Part Number:  ES-410552The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton