Spare parts and replacement keys for Roland JD800 Synthesizer

Filter
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 2
No results were found for the filter!
FFC Kabel 26 Pol 1,25 420
FFC Cable 26 Pol 1,25 420 mm
1 pcs. FFC cable 26 pin 1.25 pitch 420 mm Length = 420 mm same side contacts.
8.58€ *
Roland JD-800 Volume Potentiometer
Roland JD-800 Volume Potentiometer
1 pcs. slide potentiometer with 30mm travel and 15mm Lever. Suitable for Roland JD-800 Volume Roland XV-88 Volume The plastic lever must be shortened. The original potentiometer has a 5 mm sliding pin. This volume control with the...
8.33€ *
Roland JD-800 FFC Kabel 26 Pol 430 mm
Roland JD-800 FFC Kabel 26 Pol 430 mm
1 pcs. Roland JD800 FFC cable 26 pin Keyboard connection cable in Roland JD-800 Service Manual this cable is called FUJI CARD 26x420 This cable is the connection cable between the Mainboard in Rolands JD800 and the Contact Board Assy...
16.24€ *
FFC Buchse 26 Pol, 1,25 mm Raster gewinkelt
FFC socket 26 pin, 1.25 mm pitch right angel
1 pcs. 26 pin FFC socket with 1.25 mm pitch right angel 26 pin top contact side Pitch: 1.25 mm This FFC Socket is used in Roland JD-800. This is located on small PCB under Keyboard
0.94€ *
Wippschalter einpolig AUS, 6 A / 250 VAC mit Lötanschluß
Single pole rocker switch 250V/6A with solder lugs
Single pole rocker switch with solder lugs suitable for models Roland 6A / 250VAC Termination Solder Lug 1 pole Mounting hole: 19,8 x 12,8 mm Dimensions outside: 20,8 x 14,8 mm VDE-tested Mechanical Description: The switch housing...
4.76€ *
Roland JD-800 OLED Display Neu gelb
Roland JD-800 OLED Display new yellow
1 pcs. OLED Display brandnew in yellow for Roland JD-800 this is a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown...
108.99€ *
Roland JD800 Encoder Board neu
Roland JD800 Encoder Board new
1 pcs. Roland JD800 Encoder Board new This Encoder PCB is suitable for Roland JD800 Mechanical Description of Encoder Board: we deliver a brand new Encoder and a PCB ready mounted, herer you can just plug in the original cable. The cable...
14.45€ *
NEW
Roland JD-800 Potentiometer mit Center
Roland JD-800 Potentiometer with center
1 pcs. slide potentiometer with 30mm travel and 5mm Lever. Suitable for Roland JD-800 Attention: Special pin layout. This potentiometer has a special pin layout and can only be used as a replacement for EWANFE or EWANFJ potenziometers....
17.49€ *
2 From 2

roland-jd-800_blue-red-greenInformation to the different switches in Roland JD800:

Roland has placed three different switch in JD800.

User buttons (blue marking) part TAAL2PD55MA

Roland used a switch with a hard tactile feeling. You will need 42 pieces.

Cursor Buttons (red marking) part TAPA2115KC

Under Cursor buttons Roland used a different switch. You will need 6 pieces.

small buttons (green marking)

Then there are some small buttons. You will need 15 pieces.

 

Simply order spare parts for Roland JD-800 online



Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. In our shop we offer you Roland JD-800 spare parts products, which continue the brand quality after the replacement in the usual way. These include synthesizer replacement parts and key replacement parts, but also JD-800 encoders, PCB mount phone jacks or LCD display for Roland JD-800. One thing all Roland spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the Fantom replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which Roland JD-800 probe to buy or what type of Replacement Parts or replacement key are right for the models you use. We are happy to help!


Do not compromise on quality



A system is only as powerful as its smallest component. For you, this means that Roland brand-quality replacement parts that you know from the manufacturer should also be purchased and installed. This applies to Roland JD-800 encoders as well as the Roland Fantom LCD display or any other Fantom replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an Roland JD-800 encoder or an Roland tact switch, you have the same professional quality as buying a complete device. For all questions we are gladly there for you. Phone jack socket for PCB? Replacement keys? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.

Information to the different switches in Roland JD800: Roland has placed three different switch in JD800. User buttons (blue marking) part TAAL2PD55MA Roland used a switch with a hard... read more »
Viewed