Thank's for your e-mails. We need more time than usual for answering.
On the weekend 16-17/03/2014 there were problems with the payment methods in the shop. We apologise for this.

Encoder

Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Drehschalter, 8 Positionen, 16 mm Breite
8 position rotary switch 16 mm widht
8 position rotary switch 16 mm widht suitable for Yamaha RS-7000 Mechanical Description: Technical Description: Practical advice: These rotary switch is firmly soldered to a circuit board. For replacing craftsmanship and experience in...
14.10€ *
Encoder 12 mm für Roland
Encoder 12 mm for Roland
1 pcs. Encoder 12 mm suitable for models Roland Juno Di, Juno G, Juno Gi Roland Fantom X6 Roland Fantom X7 Roland Fantom X8 Roland MC909 Roland part number: 03122134 and 01905467 Practical advice: These encoder is firmly soldered to a...
6.25€ *
1 Stk. Encoder für E-mu Systems, Emu
1 pcs. Encoder for E-mu Systems,Emu
1 pcs. Encoder suitable for E-MU Command Station E-MU E4K, E-Synth E-MU E4XT depends on manufacturing date E-MU e6400 depends on manufacturing date E-MU B-3 Mo Phatt rack module or keyboard E-MU Planet Earth E-MU Orbit-3 E-MU Proteus...
5.87€ *
Encoder 12mm Technics extra kurzer Achse
Encoder 12 mm Technics short axis
1 pcs. Encoder 12 mm footprint and extra short axis suitable for models Technics KN5000 Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
14.40€ *
Akai MPC-2000XL Encoder
Akai MPC 2000XL Encoder
1 pcs. Encoder with short axis suitable for models Akai MPC-2000XL Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
7.90€ *
Encoder 16 mm für Kawai
Encoder 16 mm for Kawai
1 pcs. Encoder 16 mm widht suitable for Kawai K5000 Practical advice: The thread of this encoder is 2 mm longer than the thread of the ALPS encoders. Depending on the space in the housing, it can tighten a bit when reassembling. It may...
5.94€ *
Encoder 22 mm für Nord
Encoder 22 mm for Nord
1 pcs. Encoder 22 mm suitable for Nord Modular G1 Nord Modular G2 - Main Dial Practical advice: The encoders offered here come from the same manufacturer as those used by Nord. There are compared to the original small deviations in...
11.45€ *
Encoder 22 mm für Nord
Encoder 22 mm for Nord
1 pcs. Encoder 22 mm suitable for Nord Modular G2 - Secondary Dial Master Clock -> Patch Level Practical advice: The encoders offered here come from the same manufacturer as those used by Nord. There are compared to the original small...
10.71€ *
Encoder 12mm mit extra kurzer Achse
Encoder 12 mm with short axis
1 pcs. Encoder 12 mm footprint and extra short axis suitable for models Korg M3 Korg Oasys Korg Triton Korg Triton le Korg Triton extreme Korg Triton Pro Korg Triton ProX This is the original Korg spare Part Practical advice: These...
14.40€ *
Encoder16 mm für Korg
Encoder 16 mm for Korg
Encoder 16 mm widht suitable for Korg Electribe EMX1 only EC1 Korg i2, i3, i4 Korg Trinity, Trinity Plus, Trinity Pro Practical advice: The thread of this encoder is 2 mm longer than the thread of the Original encoders. Depending on the...
From 5.87€ *
Encoder 16 mm für Yamaha
Encoder 16 mm for Yamaha
Encoder 16 mm widht suitable for Yamaha RM1X Yamaha RS-7000 Practical advice: The thread of this encoder is 2 mm longer than the thread of the original encoders. Depending on the space in the housing, it can tighten a bit when...
From 5.87€ *
Encoder 16 mm für Technics KN6000
Encoder 16 mm for Technics KN6000
Encoder 16 mm widht suitable for Technics KN6000 Practical advice: The thread of this encoder is 2 mm longer than the thread of the ALPS encoders These encoder is firmly soldered to a circuit board. For replacing craftsmanship and...
From 5.87€ *
1 From 2

Encoder

Rotary or sliding encoder

Encoders are analogue or digital electronic components that are used, for example, to change data values.
They are designed as rotary encoders, but often also as sliders. Together with the decoders, they form a logical unit or a functional chain.
In synthesizers, midi devices, samplers, electric pianos, and other electronic musical instruments, they are important input devices for changing data, entering texts, editing filter values, etc. their proper functioning depends quite a bit on their being in perfect working order.
The usefulness of a synth or sampler often depends on its proper functioning. If the encoder is defective or does produce unclear values, the device in which it is installed can usually no longer be used without errors.

Encoder malfunctions

Over time, encoders can be subject to wear and tear that leads to ambiguous or incorrect readings. This then manifests itself in the encoder being moved by the user to a certain position from which a certain result would be expected. Instead of displaying this correct, unambiguous value, the display of the device jumps back and forth between two values, for example. It may also be that certain values can no longer be approached. External mechanical influences could also have damaged the encoder. For example, between 0 and 30 everything is displayed correctly, but the range between 31 and 67 cannot be selected, although from 68 to 128 everything seems to work correctly again. Such errors indicate a defective encoder. Replacing the defective rotary or slide encoder very often restores a perfectly operable unit.

Encoder repair

Often, the defective encoder can be replaced relatively easily, whereas sometimes it is necessary to disassemble the entire unit in order to access the corresponding solder points so that the replacement can be carried out. Depending on the instrument, this can be quite time-consuming and, if you do not have the right tools and/or the manual skills, should rather be carried out by a specialist workshop in order to avoid lasting damage to your high-quality musical instrument. In this way, you will avoid subsequent costs due to improper handling, and you will also have your instrument repaired with the guarantee of a specialist workshop.
In our well-equipped workshop, we have circuit diagrams, instrument manufacturers repair instructions, special tools and measuring instruments, and can give your instrument the treatment it needs and deserves.
Make an appointment to have your electronic musical instrument repaired.
Write to us at.

Encoder Rotary or sliding encoder Encoders are analogue or digital electronic components that are used, for example, to change data values . They are designed as rotary encoders , but... read more »
Viewed