Thank's for your e-mails. We need more time than usual for answering.
On the weekend 16-17/03/2014 there were problems with the payment methods in the shop. We apologise for this.

Spare parts and replacement keys for Casio Synthesizer

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
CR2032 mit Lötbeinen für Casio
CR2032 Solder pin for Casio
1 pcs. CR2032 with solder pin suitable for Casio CZ-1 Attention: Shipping for Europe only Technical Description: The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm . Due to the soldering legs , the installation height...
From 3.34€ *
Batterie 2/3 mit Lötbeinen für Casio
Battery 2/3 Solder pins for Casio
1 pcs. Battery with 3 solder pins suitable for Casio VZ-1 Casio VZ-10M Attention: Shipping for Europe only The battery has a diameter of 17 mm and a length of 33 mm. The rated voltage is 3 volts. Its capacity is 1500 mAh. Manufacturer...
14.28€ *
Leuchtfolie, 41 x 67 mm für Casio VZ-1, VZ-10
EL-panel, 41x67 mm for Casio VZ-1, VZ-10
1 pcs. EL-panel as sparepart for backlight in Casio FZ-10 Casio FZ-10M Casio FZ-20M Casio VZ-1 Casio VZ-10 Be carefull: These backlights are very sensitive for heat. When soldering the cable necessarily make for a very good heat...
16.95€ *
Volume Schiebepotentiometer 30mm für Casio
Volume Slidepotentiometer Casio 30mm Travel
1 pcs. slide Potentiometer for Casio CZ-1 Volume Casio CZ-1000 Volume Casio CZ-3000 Volume Casio CZ-5000 Volume The Lever on original Potentiometer is shorter. You can cut this Lever to the right length. Electrical properties: The stereo...
8.33€ *
Platinen Steckverbinder 14 Pol Raster 2,5mm
PCB Connector 14 Pol, 2.5 mm Pitch
1 pcs. PCB Connector 14 Pol, 2.5 mm Pitch This cable is ready assembled with a 14 pin board connector. The wires on the other side of the cable are stripped and tinned. This cable is used by various manufacturers as display cable....
From 9.84€ *
YKB21-5010 - 6,3 mm Klinkenbuchse Print Stereo
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instruments this phone jack corresponds to these parts: YKB21-5010 HLJ0520-01-010 HLJ1520-01-3010 HTJ-064-10D same PCB layout, different...
From 2.25€ *
YKB21-5012 - 6,3 mm Klinkenbuchse Print Mono
YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed...
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instruments this Phone Jack corresponds to these parts: YKB21-5012 HLJ 4306 HLJ 4306-01-3000 Mono with switch it is used by the following...
From 2.64€ *
Wippschalter einpolig AUS, 6 A / 250 VAC mit Lötanschluß
Single pole rocker switch 250V/6A with solder lugs
Single pole rocker switch with solder lugs suitable for models Korg MonoPoly Korg PolySix Korg Part Number: 37501600 6A / 250VAC Termination Solder Lug 1 pole Mounting hole: 19,8 x 12,8 mm Dimensions outside: 20,8 x 14,8 mm VDE-tested...
4.76€ *
Netzschalter einpolig AUS, 5A / 250VAC mit Lötanschluß SDDLD10900
Single pole push switch, 250V/5A with solder...
Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for models Korg M1, M1R Korg T1, T2, T3 Korg Part Number: 375006100 The power switch corresponds to the ALPS switches SDDLD10900 TV5....
6.95€ *
Netzkabel, 3 polig Kaltgerätestecker
Power cable 3 pol C13-plug, 2m
Power cabel 2m with 3P C13 plug
7.58€ *
Netzkabel, 3 polig Kaltgerätestecker gewinkelt
Power cable 3 pol C13 Socket, 1.8 m
1 pcs. Power cabel with 3Pol C13-plug VDE tested Cable: H05VV-G3G0,75mm² Length: 1,8 m
6.45€ *
Taster 4,3 mm
tactile switch 4,3 mm
1 pcs. tactile switch suitable for models Korg Monopoly Korg PolySix Korg BX3/CX3 first Version build in 1980's Roland JX 10P Roland Jupiter 8 Roland TR808 Part Number: Korg: 37503400, Roland: 13169601 The buttons are firmly soldered to...
From 0.99€ *
1 From 2

Casio synthesiser

The company Casio is mainly known for its products in the field of pocket calculators and wrist watches. As a manufacturer of keyboard instruments, synthesizers, or electric pianos, Casio is not so familiar to many people, or almost unknown.
Casio started building keyboards and synthesizers in the 1980s. The competition from Yamaha and Roland, the two market heavyweights, was of course overwhelming. However, the Casio synthesizers of the early years stood out because of their sound generation, which was different from other manufacturers at the time, because Casio brought the first completely digital synthesizer onto the market with the CZ-101. Even today, Casio synthesizers have their enthusiasts, but the trade in the instruments is small. Anyone who owns a Casio synthesiser will rarely have a reason to give it away or sell it.

Service and spare parts

Support for the keyboard instruments of the early years has long since been discontinued by Casio. Accordingly, it is difficult to obtain spare parts. We have therefore included Casio synthesizers in our range, and as far as possible, we offer suitable spare parts for Casio synthesizers in our online shop. Where possible, our spare parts are OEM spare parts. This means that we obtain the spare parts from the exact same supplier from whom Casio obtained its components or assemblies at the time. However, this is usually only possible if these components are still being produced today. If the production of certain components or assemblies has been discontinued, we can very often offer an equivalent or even better replacement.
However, there are also spare parts for which it does not make sense to offer the components from back then. For example, in the case of obsolete LCD displays, it makes much more sense to fall back on current Display-technology. Of course, we have checked such spare parts for full compatibility and ensured through thorough testing in our own specialist workshop that the new display assemblies are really suitable as replacements. The suitability for use depends on many different factors, which must not cause any malfunctions in interaction with the other components.
In each case, we have carried out a test installation on a suitable instrument to ensure the proper functioning of a new component, or an entire assembly.

Repairs

The test installation is a normal procedure in our specialist workshop, which we carry out on every new component, and on every new assembly that we offer as a spare part. This is the only way we can guarantee the high quality standard of our offered spare parts. You are welcome to deliver your equipment directly for repair, or send it in with a transport service provider of your choice. Our qualified workshop staff will take care of your instrument and restore it to the state of the art. After consultation with you, an LCD display or a new OLED display will be installed. We are also happy to take over the calibration of older instruments after the installation of the spare parts. Please make an appointment with our specialist workshop.
In certain cases, a repair can also be carried out on your premises. However, this service is limited to customers within North Rhine-Westphalia.

Casio synthesiser The company Casio is mainly known for its products in the field of pocket calculators and wrist watches. As a manufacturer of keyboard instruments , synthesizers , or... read more »
Viewed